Owner`s manual

ORP OVERFEED TIMEOUT:

The ORP Overfeed Timeout inhibits ORP feed, activates audible and visual alarms,

and sends a message to the POOLCOMM website when the ORP setpoint is not

reached after feeding continuously for a selectable period of time.

From the Configuration Setup Menu:

Press DOWN to find the ORP Overfeed Timeout menu item.

Press ENTER to select ORP Overfeed Timeout.

The current ORP Overfeed Timeout Setting will be displayed:

Press UP or DOWN to scroll to the desired setting.

Press ENTER to save your selection.

AUXILIARY pH SETPOINT:

The auxiliary relay can be programmed to provide acid or base feed pH correction,

or to support supplemental pH control with a second setpoint. Once the setpoint is

entered, go to Auxiliary Output Setup to assign the relay to the desired function.

From the Configuration Setup Menu:

Press DOWN to find the Auxiliary pH Setpoint menu item.

Press ENTER to select Auxiliary pH Setpoint.

The current Auxiliary pH Setpoint will be displayed:

Press UP or DOWN to scroll to the desired setting.

Press ENTER to save your selection.

AUXILIARY ORP SETPOINT:

The auxiliary relay can be programmed to support supplemental ORP control with a

second setpoint, or dechlorination. Once the setpoint is entered, go to Auxiliary

Output Setup to assign the relay to the desired function.

From the Configuration Setup Menu:

Press DOWN to find the Auxiliary ORP Setpoint menu item.

Press ENTER to select Auxiliary ORP Setpoint.

The current Auxiliary ORP Setpoint will be displayed:

Press UP or DOWN to scroll to the desired setting.

Press ENTER to save your selection.

AUX pH Setpoint

7.5 pH

ORP Overfeed Timeout

Off

AUX ORP Setpoint

650 mV