Owner`s manual

SECTION 3. IMPORTANT SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION

1. WARNING - Important safety information is contained throughout this manual.

Read complete instructions prior to installation.

2. WARNING - Risk of Electric Shock. Connect controller only to a grounding type

receptacle protected by a ground-fault circuit interrupter (GFI). CAT Controllers

recommends installation to a dedicated GFI circuit breaker performed by a licensed

electrician.

3. WARNING - Disconnect power before servicing. Other than the fuses, there are

no user serviceable parts inside the controller.

4. WARNING - All power cords should be inspected frequently. Any damaged

power cords must be replaced immediately to reduce the risk of electric shock.

Never operate a controller without functional flow protection.

5. WARNING - Installation requires a properly located GFI protected receptacle.

Never use an extension cord for electrical connections to the controller.

6. WARNING - Always mount controller in a safe area not subject to damage by

moving objects. Never bury controller power cords.

7. WARNING - Any person using, adjusting, or monitoring the controller must be at

least 18 years of age and be familiar with these instructions and the contents of this

manual.

8. WARNING - Always take and record manual water chemistry readings in

conformance with Health Department requirements. Although automated

controllers are a great aid in maintaining healthy water quality, controllers are not a

substitute for manual water testing with an accurate test-kit.

9. WARNING - Always read and become familiar with Material Safety Data Sheets

(MSDS) and safe handling instructions for all chemicals used with the controller.

10. Caution: The automatic controller should not be installed where it is accessible to

the public.