Owner`s manual

SECTION 4. PACKAGE CONTENTS
Please unpack your new controller system carefully. Do not use a razor or
sharp instrument to remove contents. Report any shipping or handling
damage immediately to your shipping company. Enclosed in the packaging
you should find all of the following:
1
(1) CAT 4000 Wireless Water Quality Controller
(1) PVC Backboard with Mounting Holes and Stainless Hardware
(1) Professional Series pH Sensor with 24” Cable and BNC Connector
(1) Professional Series ORP Sensor with 24” Cable and BNC Connector
(2) Sensor Storage Containers
1
(1) Injection Molded Flow Cell
1
(3) 1/4” NPT x 3/8” Tubing True-Seal Ball Valve
1
(1) Flow Switch with 24” Cable and Specialty Connector
1
(2) BNC Connector Protective Covers (Remove to Connect Sensors)
(1) 30’ Roll, Blue Poly Installation Tubing (3/8” OD)
(2) 1/4” NPT x 3/8” Tubing True-Seal Connectors
(1) CAT 4000 Quick Reference Guide
Before commencing installation, please confirm that items listed above have
been included. Please report any shortages immediately to the factory.
1
Denotes items assembled at the factory.