Step-by-step Instructions

ManualsBrandsWATER ID ManualsElectronicsPrimeLab 2.0

The PrimeLab 2.0 hardware-development and design, the

ﬁrmware, software, app and cloud-solution, along with all

calibration curves (parameters) and reagents are entirely

Made in Germany.

4 x 24mm/10ml glass vials with lid (light shield integrated in lid)

1 x 24mm vial adapter (built-in; exchangeable)

1 x Battery-Charger with USB-cable (type C)

Item code Item description

PrimeLab 2.0 Basic Kit

PL02B PrimeLab 2.0 Basic Kit in plastic carrying case with foam insert.

1 x PrimeLab 2.0 Multitest Photometer

1 x light shield for 16mm vials, Eppendorf vials and calibration

1 x 10.5 cm plastic stirring rod

1 x graduated 10ml plastic syringe

1 x vial cleaning brush

18 19

lab-pipettes, ﬁlter equipment or additional vials.

on the parameter-methods chosen, additional equipment may be needed, such as professional

Although the PrimeLab 2.0 Basic-Kit already contains most of the accessories needed, depending

PrimeLab 2.0 Accessories

Technical Data

Legipid (1 hour Legionella test) requires special equipment, which is not listed on this page

PL2Sp-IH40ATC-ALK pH-Electrode ("Low Sodium Error" version).

PLSp2-USBhuba USB-Hub (Type C and Type A)

Electrodes / Probes

BNC-connector, cable length = 1 meter.

PLSp2-USBcable USB-cable (Type A on one end / type C at the other end)

Other Accessories

Reference standards

PL2Sp-IJ44A/ATC pH-Electrode for solids: Soils, creams, emulsions, foods.

® ®

PLSp-BltD-1 Bluetooth USB dongle (to enable Bluetooth on any Windows-PC)

PLSp2-carr2 Large PrimeLab 2.0 plastic carrying case

PLSp2-Ad16/Ad1 PrimeLab 2.0 vial adapter for 16mm glass vials / 1ml Eppendorf vials

reasonable ionic strength. BNC-connector, cable length = 1 meter.

BNC-connector, cable length = 1 meter.

PLSp2-USBa-c USB-connector (type A to type C)

Ask for our large variety of check-standards (coloured epoxy raisin) in sealed 24mm glass

vials

PLSp-mft-1 Micro fiber cloth 13x13 cm for PrimeLab vials

Sealed gel electrode for samples with low contamination levels and

PL2Sp-Ref112038-f Reference standard kit for PrimeLab IDs 11 (chlorine by tablet), ID

20 (cyanuric acid) and ID 38 (pH by tablet).2 standards for ID 11

(~0.5 mg/l and ~2 mg/l), 1 standard for ID 20 (~80 mg/l), 1 standard

for ID 38 (~7.00 pH) as well as a ZERO vial.

PLSp2-chargeEU PrimeLab 2.0 charger with EU plus

PLSp2-GSM GSM-modem (USB-Type-C)

PLSp2-UK/AUS/US UK/AUS/US plug for PrimeLab 2.0 charger

PL2Sp-Ref122039-f Reference standard kit for PrimeLab IDs 12 (chlorine by liquid), ID 20

(cyanuric acid) and ID 39 (pH by liquid).

PL2Sp-RefFLSC 2 x 100ml reference standards 100 µg/l Fluorescein, deionized water

PL2Sp-RefTRB 3 x 10ml reference standards 0.5 NTU, 10 NTU, 1000

PL2Sp-IH40ATC pH-Electrode

Sealed gel electrode for samples with low contamination levels and

PL2Sp-RefPTSA 2 x 100ml reference standards 500 µg/l PTSA, deionised water

reasonable ionic strength. BNC-connector, cable length = 1 meter.

2 standards for ID 12 (~0.5 mg/l and ~2 mg/l), 1 standard for ID 20

(~80 mg/l), 1 standard for ID 39 (~7.00 pH) as well as a ZERO vial.

In a box with description. 1 year shelf life.

PL2Sp-IJ44A pH-Electrode for solids: Soils, creams, emulsions, foods.

PLSp2-Alucase Aluminium trolley with foam inserts for PrimeLab 2.0 plus accessories

In a box with description. 1 year shelf life.

PLSp-GlsBot50ml 50ml glass-bottle with stopper

PLSp-Kv1610-10 Set of 10 x 16mm (10ml) round glass vials with lid

Vials and measuring cups

PLSp-Kv1-100 Set of 100 x 1ml Eppendorf-vials

Item code Item description

SVZdev100 100ml plastic measuring cup

PLSp-Kv2410-10 Set of 10 x 24mm (10ml) round glass vials with lid / light shield

integrated in lid

PLSp-PIP01ml-tips10 10 x tips for PLSp-PIP01ml pipette

PLSp-LG-ELF10 Set of 10 x 60ml measuring cup with red lid

PLSp-inj01 Graduated Plastic Syringe (1ml)

PLSp-PIP10ml-tips10 10 x tips for PLSp-PIP10ml pipette

PLSp-PIP1ml 1 ml pipette (variable volume 0.1-1ml)

PLSp-PIP01ml 0.1 ml pipette (variable volume 0.01-0.1ml)

Filter utilities

PLSp-InjFil-1 Luer lock syringe (20ml) with threat for filter holder

PLSp-FiltGFC 25mm GF/C Filter. Bottle of 50 filter papers

PLSp-Filt45M 25mm 0.45 µm filter. Bottle of 50 filter papers

PLSp-inj03 Graduated Plastic Syringe (3ml)

PLSp-PIP10ml 10 ml pipette (variable volume 1-10ml)

SPstr10 Set of 10 x 13 cm plastic stirring rods

Dosing equipment

PLSp-str10 Set of 10 x 10.5 cm plastic stirring rods

Electronics

PLSp-CODheatblock-E Heat block for 8 x 16mm vials. Temp. 70, 100, 120, 150 and

160°C. Digital reading,

Stirring rods / cleaning brushes

220 - 240 V / 50 - 60 Hz and 110 - 130 V / 50 – 60 Hz, 140W

PLSp-Filtad1 filter holder for PLSp-InjFil-1 luer lock syringe

SPclb10 Set of 10 x 9.5 cm vial-cleaning brushes

Digital reading. 230V, 50/60 Hz.

PLSp-CODheatblock-L Single block thermostat for 12 x 16mm vials. Temperature up

to 150°C.

PLSp-inj1 Graduated Plastic Syringe (10ml)

PLSp-PIP1ml-tips10 10 x tips for PLSp-PIP1ml pipette

Display: 5.5'‘ Color-HD-Touch Display

Camera: In-built barcode / QR-code scanner

Individual adjustment possible

test instructions during measurement process

Power supply: 8,500 mA Li-Io-battery

Water-proof rating: The device is splash-water-proof (IP )ausfüllen

Calibration: Auto-calibration function with certificate (software)

Internal memory: >5,000

with recognition of ZERO types

(software) LabCOM App (Android / iOS)

Clock/Date: RTC (Real-Time-Clock) with calendar function

Using reagents from other manufacturers may lead

to wrong readings / higher tolerances PrimeLab reagents

are etirely “Made in Germany” or “Made in UK”!

Reagents: The calibration curves for the individual parameters /

measurement procedures are adjusted to the reagents

offered by Water-i.d.

LabCOM Cloud (web-browser)

Languages: > 15

Auto-Off: Factory default setting = 10 minutes.

One-Time-Zero: Intelligent OTZ (One-Time-Zero) function

Environment: 5°C - 45°C / 30 - 90% rel. humidity

Menu guidance: Intuitive, display-controlled 4-button menu guidance;

Electrodes: USB-type-C connector for pH/EC/TDS/ORP/Temp-Probes

User defined parameter function

Connectivity: Bluetooth 4.2

GSM (via USB-modem)

585/610/645/680/705/730/760/810/860/900/940nm

Connectivity: LabCOM software (Windows / Mac)

Spectral range: 390nm - 950nm

180° and 90° Setup for direct and indirect measurement

Weight: 715g

(technical) WiFi

USB (type C)

Dimensions: 10cm x 25.5cm x 5.9cm (width x length x depth)

18 wavelength, peaks at 410/435/460/485/510/535/560/

Parameters: more than 140 parameters (flexible setup)

Probe-Accessories

Item code Item description

.PL2Sp-IH30D ORP-Electrode with Pt-disc for faster response.

PL2Sp-IH30 ORP-Electrode.

BNC-connector, cable length = 1 meter.

PL2Sp-EC1T EC-Electrode (2-pole).

BNC-connector, cable length = 1 meter. ATC

PL2Sp-ElBox PrimeLab 2.0 Electrode-Connector (A/D switch)

Other

reasonable

ionic strength. BNC-connector, cable length = 1 meter.

PL2Sp-Probe-Holder PrimeLab 2.0 Electrode-Holder

Sealed gel electrode for samples with low contamination levels and

PL2Sp-Probe-Stirrer PrimeLab 2.0 magnetic-stirrer

Calibration / Reference Standards

User manual

1 x "PL2Sp-KCl3mol-10" dropper bottle with 10ml KCl-electrode soaking

solution

1 x "EMphbuf1000-20" 20 ml "pH 10.00" calibration solution

1 x "EMphbuf400-20" 20 ml "pH 4.00" calibration solution

PL2SP-ElePHsolids PrimeLab 2.0 Electrode-Basic-Kit "pH (solids)":grey carrying case with

foam insert

PL2SP-ElePHlowSodKit PrimeLab 2.0 Electrode-Basic-Kit "pH (low sodium error)":grey carrying

case with foam insert

Measuring range: 0.00 - 14.00 pH, resolution: 0.01 pH

1 x "PL2Sp-ElBox" A/D-switch-box with BNC-IN and USB-Type-C-OUT to

connect with PrimeLab 2.0 Photometer

1 x "EMphbuf700-20" 20 ml "pH 7.00" calibration solution

1 x "EMphbuf1000-20" 20 ml "pH 10.00" calibration solution

1 x "PL2Sp-IJ44A" pH-Electrode for solids: Soils, creams, emulsions,

foods. BNC-connector, cable length = 1 meter Measuring range: 0.00 -

14.00 pH, resolution: 0.01 pH

Kits

1 x "EMphbuf700-20" 20 ml "pH 7.00" calibration solution

1 x "EMphbuf400-20" 20 ml "pH 4.00" calibration solution

PL2SP-ElePHkit PrimeLab 2.0 Electrode-Basic-Kit "pH / Temp.": grey carrying case with

foam insert 1 x "PL2Sp-IH40ATC" pH-Electrode. Sealed gel electrode for

samples with low contamination levels and reasonable ionic strength. BNC-

connector, cable length = 1 meter. Measuring range: 0.00 - 14.00 pH,

resolution: 0.01 pH; Temperature-range: 0 - 60°C. ATC 1 x "PL2Sp-ElBox"

A/D-switch-box with BNC-IN and USB-Type-C-OUT to connect with

PrimeLab 2.0 Photometer 1 x "PL2Sp-KCl3mol-10" dropper bottle with 10ml

KCl- electrode soaking solution 1 x "EMphbuf700-20" 20 ml "pH 7.00"

calibration solution 1 x "EMphbuf400-20" 20 ml "pH 4.00" calibration

solution 1 x "EMphbuf1000-20" 20 ml "pH 10.00" calibration solution

1 x "PL2Sp-KCl3mol-10" dropper bottle with 10ml KCl-electrode soaking

solution

1 x "EMphbuf400-20" 20 ml "pH 4.00" calibration solution

PL2SP-ElePHsolidsATC PrimeLab 2.0 Electrode-Basic-Kit "pH (solids) + Temp. (ATC)":

grey carrying case with foam insert

various ask for our full list of calibration standards

1 x "PL2Sp-ElBox" A/D-switch-box with BNC-IN and USB-Type-C-OUT to

connect with PrimeLab 2.0 Photometer

User manual

1 x "PL2SP-IJ44A/ATC " pH-Electrode for solids: Soils, creams,

emulsions, foods. BNC-connector, cable length = 1 meter. With

Temperature-reading and ATC.

Measuring range: 0.00 - 14.00 pH, resolution: 0.01 pH

1 x "PL2Sp-IH40ATC-ALK" pH-Electrode ("Low Sodium Error" version).

Sealed gel electrode for samples with low contamination levels and

reasonable ionic strength. BNC-connector, cable length = 1 meter.

1 x "PL2Sp-ElBox" A/D-switch-box with BNC-IN and USB-Type-C-OUT to

connect with PrimeLab 2.0 Photometer

1 x bottle with reference electrolyte

User manual

1 x "PL2Sp-KCl3mol-10" dropper bottle with 10ml KCl-electrode soaking

solution

1 x "EMphbuf700-20" 20 ml "pH 7.00" calibration solution

1 x "EMphbuf1000-20" 20 ml "pH 10.00" calibration solution

1 x "EMorpbuf468-20" 20 ml "ORP +468mV" calibration solution

1 x "EMorpbuf220-20" 20 ml "ORP +220mV" calibration solution

1 x "PL2Sp-IH30" ORP-Electrode. Sealed gel electrode for samples

with low contamination levels and reasonable ionic strength. BNC-

connector, cable length = 1 meter. Measuring range: +/- 1,000mV,

resolution: 1mV

1 x "PL2Sp-ElBox" A/D-switch-box with BNC-IN and USB-Type-C-OUT

to connect with PrimeLab 2.0 Photometer

TDS: 0 - 2000 mg/l (1 mg/l), 2 - 325 g/l (1 g/l)

1 x "PL2Sp-KCl3mol-10" dropper bottle with 10ml KCl-electrode

soaking solution

PL2SP-EleORPkit PrimeLab 2.0 Electrode-Basic-Kit "ORP":grey carrying case with foam

insert

User manual

PL2SP-EleORPptdisckit PrimeLab 2.0 Electrode-Basic-Kit "ORP / Pt-disc for faster response":

1 x "EMorpbuf220-20" 20 ml "ORP +220mV" calibration solution

User manual

1 x "PL2Sp-EC1T" EC-Electrode (2-pole). BNC-connector, cable length =

1 meter. ATC

Measuring range: +/- 1,000mV, resolution: 1mV

1 x "PL2Sp-ElBox" A/D-switch-box with BNC-IN and USB-Type-C-OUT to

connect with PrimeLab 2.0 Photometer

Measuring range / resolution:

1 x "EMorpbuf468-20" 20 ml "ORP +468mV" calibration solution

1 x "PL2Sp-ElBox" A/D-switch-box with BNC-IN and USB-Type-C-OUT to

connect with PrimeLab 2.0 Photometer

EC: 0 - 2000 µS/cm (1 µS/cm), 2 - 500 mS/cm (1 mS/cm)

1 x "EMecbuf1413-20" 20 ml "1413 µS/cm" calibration solution

PL2SP-EleECkit PrimeLab 2.0 Electrode-Basic-Kit "EC-TDS-Salz / Temp.": grey carrying

case with foam insert

1 x "EMecbuf1288-20" 20 ml "12.88 mS/cm" calibration solution

User manual

PL02B-TRB PrimeLab 2.0: Starter-Kit WITH Turbidity (NTU) (without reagents)

Temperature: 0 - 90°C (1°C)

1 x grey plastic carrying-case with foam insert

4 x 24mm/10ml glass-vials with lid (light-shield incorporated into the lid)

grey carrying case with foam insert

1 x "PL2Sp-IH30" ORP-Electrode with Pt-disc for faster response. BNC-

connector, cable length = 1 meter.

1 x PrimeLab 2.0 Multitest Photometer

Salt: 0 - 1000 mg/l (1 mg/l), 1.00 - 300 g/l (1 g/l)

compatible to the free of charge PrimeLab tools: LabCOM App/Software/Cloud

(Android, iOS, Windows, Mac, Browser)

1 x 10ml syringe

1 x NTU-Turbidity calibration kit. Sealed glass vials with 0.5 / 10 / 1000

1 x Bluetooth USB dongle

1 x microfibre cleaning cloth for vials

1 x grey plastic carrying-case with foam insert

NTU

USB Type C

1 x charger with cable (USB-Type-C)

PL02BALL PrimeLab 2.0: starter-kit / ALL parameters activated (without reagents)

1 x vial cleaning brush

built-in camera to scan QR-Codes

1 x 24mm vial adapter (built-in; exchangeable)

Self-Calibration-Mode with certificate (via LabCOM software)

1 x light shield (for 16mm and 1ml vials as well as check-standards)

10 x 24mm/10ml glass-vials with lid (light-shield incorporated into the lid)

1 x light shield (for 16mm and 1ml vials as well as check-standards)

5.5'' HD-Colour-Touch Display

1 x 1 - 10ml professional lab pipette with 2 tips

GSM (via USB-Type-C Modem)

1 x 24mm vial adapter (built-in; exchangeable)

1 x 16mm vial adapter

2 x 10,5 cm stirring rod

1 x Filteradapter for 20ml Luer-Lock-Spritze

1 x 10ml plastic syringe (graduated)

1 x printed user manual in a ring-binder

Bluetooth 4.2

16 wavelengths-scan (410 - 940nm)

1 x PrimeLab 2.0 Multitest Photometer

"I-OTZ" Intelligent-One-Time-Zero

1 x charger with cable (USB-Type-C)

8.400 mAh Li-Ion-battery (built-in)

1 x 10.5 cm stirring rod

WiFi

Option of over 140 different parameters (chargeable activation required)

"90° ready" for NTU, PTSA, Fluorescein, Plankton

Option to connect Electrodes (via USB Type C plus A/D-changer-Box)

1 x 1ml Eppendorff-vial adapter

1 x Luer lock syringe (20ml) with adapter for filter holder

1 x can with 50 Filterpapieren GF/C (25mm)

1 x can with 50 Filterpapieren 0.4µ (25mm)

1 x Bluetooth USB dongle

1 x cleaning brush for vials

1 x 100ml can with Deckel (for dilution)

1 x microfibre cleaning cloth for vials