77000RRR.OP21.1L.r2

If the CX-1 is charging with the Power (ON/OFF)

Button turned ON, the “1-Day”, “Weekly”, and “ON/

OFF” LEDs will be ON (as shown on the left). The

CX-1 will not be able to operate until the Power (ON/

OFF) Button is turned OFF and then back ON. If

you notice these LEDs are ON during charging, it

is recommended that you turn the Power (ON/OFF)

Button OFF.

*This is a safety feature to ensure that the CX-1 does not

turn itself ON while charging or shortly after unplugging

the charger.

Battery Packs Charging (Flashing)

Battery Packs Charged (Solid)

If one or both LEDs are not ashing or do not turn solid, contact Water Tech Customer Service.

As both battery packs are charging,

the LEDs (shown above) will ash.

Once a battery pack is fully charged, its

LED will turn solid. It is common for 1 LED to

turn solid before the other.