Instructions / Assembly

Parts List
(A) LED Light Bar (B) LED Transformer (C) LED (D) Wire Clip
Wire Remote
(E) Pump (F) Header (G) Shroud
(H) Rock Tray (I) Wall Bracket
(J) Tap Screws and EZ Anchors
™ (K) Rocks
Water Wonders Assembly:
Tools Required:
Level
Pencil
Phillips Screwdriver
Measuring Tape
Decide where you would like to install your fountain.
** It is critical that your waterfall is level as this will ensure even water flow. **
a. Because of the relatively light weight nature of your new fountain, it is not necessary to mount it
directly into wall studs.
b. Mount indoors only and in a place that is not in direct sunlight.
c. We recommend you install your waterfall above an electrical outlet. A Ground Fault Interrupt (GFI)
outlet with an internal circuit breaker is preferred.