User Manual
CONGRATULATIONS ON CHOOSING THE WATERLOGIC 4 FIREWALL™ Thank you for choosing the Waterlogic 4 Firewall, the advanced water dispenser. All Waterlogic products are designed to deliver pure refreshing water when you want it and in the options of hot, cold, ambient and sparkling. Please take a little time to read these instructions prior to use. YOUR WATERLOGIC WATER DISPENSER The Waterlogic 4 Firewall The Waterlogic 4 Firewall is a state-of-the-art mains fed drinking water dispenser.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Your Waterlogic 4 Firewall is always ready for use but also features an energy saving mode called sleep mode. If the sleeping cat symbol is illuminated, the machine has entered sleep mode and pushing any button will bring the machine out of sleep mode. HOT, COLD AND SPARKLING MACHINE MODELS Operating the machine is very simple. Firstly, place a cup in the dispense area.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS HOT AND COLD MACHINE MODELS, COLD ONLY MACHINE MODEL COLD AND AMBIENT MACHINE MODELS (optional) COLD water Press the cold water button. Cold water will be dispensed 3 seconds after the button is pressed. If the tank needs to cool, the cooling icon will light up but you can still dispense water while it is cooling the water. AMBIENT WATER Press the ambient water button and water will be dispensed 3 seconds after the button is pressed.
DISPLAY PANEL AND ICONS ADVISORY ICONS The UV lamp is operating The Waterlogic 4 Firewall is chilling Extra hot water has been selected The Waterlogic 4 Firewall is heating up Sleep Mode press any button to bring machine out of sleep mode MALFUNCTION ICONS No water supply check the water supply is turned on, if fault persists please call your authorised service agent The Waterlogic 4 Firewall uses simple icon symbols to advise on the status and functionality of your water dispenser.
CLEANING, MAINTENANCE AND SERVICING TECHNICAL SPECIFICATIONS DESCRIPTION Weekly Cleaning It is recommended that you clean your Waterlogic water dispenser at least once per week. Please follow the cleaning procedure below: • Before starting, please turn off the power at the wall socket and remove the power cord. • Please put on clean rubber gloves before commencing with the cleaning procedure. • Remove and empty the drip tray assembly.
WARRANTIES END OF LIFE Subject to the standard terms and conditions of sale (a copy of which has been provided to you), neither Waterlogic International Limited (“Waterlogic”), nor any affiliated companies shall be liable for any damage which could affect, directly or indirectly, any person or property.
TROUBLE SHOOTING BioCote® (Anti-microbial solution) No flow of water: Ensure that there is a mains water supply to the machine and that the machine is turned on. If an anti-flood device is fitted to the supply of the machine, this should be checked to ensure that it has not activated. The hot water is not hot and the cold water is not cold: Make sure that the green heater/ compressor switch at the rear of the machine is turned on.
ENG0021-13/04/11 For further information on Waterlogic and our products, please contact your local distributor or visit www.waterlogic.