Manual

Process:

• Remove the bottom drawer. See operation section: Re-

moving and Installing Drawers.

• Lay the cabinet on its back. Use packaging material to

protect the nish.

• Attach the casters using (4) 1/4 - 20 x 5/8" screws and

(4) 1/4 - 20 nuts per caster. Mount both swivel casters on

the same side of the unit as the side handle.

• Wrench tighten all screws.

• Return the unit to its upright position.

• Reinstall bottom drawers.

CASTER INSTALLATION

Items Needed:

1/4 - 20 x 5/8" (Qty: 16)

1/4 - 20 Nut (Qty: 16)

7/16-in Wrench

OUTLET STRIP INSTALLATION

• Attach outlet strip to plastic top using the screws (4)

provided with the outlet strip.

PLASTIC TOP INSTALLATION

• Slide the two plastic top pieces together and place on the

unit.

• Attach the top to the unit using (3) #14-10 x 3/4" screws

and (3) 1/4" washers. Be sure the individual tops are

snug against each other.

• Complete top attachment using (4) #14-10 x 3/4" screws

and (4) 1/4" washers.

• Insert plug into hole in the plastic top. NOTE: To use this

hole for cord management, remove the center portion of

the plug before installing.

• Place wood top on the plastic top.

Items Needed:

#14 - 10 x 3/4 Screw (Qty: 7)

1/4 - Washer (Qty: 7)

Screw

Nut