Quick Start Guide

GETTING STARTED
NEED HELP?
Call Us! 1-800-525-2774
PRIMING UNIT (FIRST TIME USE ONLY)
1
2
3
Set pressure control on base to high
(pressure setting No.10), point the
handle and tip into sink. Turn power
and water ON until water ows
from the tip. Turn both power and
water OFF.
Connect the charger cord to the USB
power supply. Plug the power supply
into the wall outlet and connect
magnetic charger to unit and charge
for approximately 5 hours.
Remove the reservoir and ll with
water. Replace reservoir and press
down rmly.
Insert tip into the Water Flosser
handle, pressing down rmly until it
clicks into place.
Visit Waterpik.com/WelcomeWF
To watch a How To Video and nd additional product support.
Turn the pressure control on the base of the unit
to the lowest setting (pressure setting No.1) for
rst-time use. Gradually increase pressure over
time to the setting you prefer – or as instructed
by your dental professional.
Aim water at the gumline at a 90
degree angle. Follow the gumline and
pause briey between teeth.
With unit OFF, place tip in mouth. Start on
low pressure. Turn power ON and water ON.
Adjust pressure to your liking.
Lean over sink. Close lips enough to
prevent splashing.
FILL
ADJUSTING THE PRESSURE SETTING
4
5
USING THE WATER FLOSSER
Quick Start Guide
ON
OFF
ON
OFF
ON
OFF
HIGH
LOW
INSERT
EJECT
• 2 • 4 • 6 • 8 • 10
POWER
ON
• 2 • 4 • 6 • 8 • 10
CHARGE
Canadian customers please visit www.Waterpik.ca for more information.
ON
OFF
TIP: TO AVOID MESS KEEP TIP
IN MOUTH WHILE UNIT IS ON.