Specifications

Firewall Protection
150
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv4 LAN WAN Inbound Service Rules
 To create an IPv4 LAN WAN inbound rule:
1. In the upper right of the LAN WAN Rules screen, the IPv4 radio button is selected by default.
The screen displays the IPv4 settings (see Figure 75
on page 145).
Click the Add table button under the Inbound Services table. The
Add LAN WAN Inbound
Service screen for IPv4 displays:
Figure 79.
2. Enter the settings as described in Table 34 on page 141. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• W
AN Destination IP Address
• LAN Users (This drop-down list is available only when the WAN mode is Classical
Routing. When the W
AN mode is NAT, your network presents only one IP address to
the Internet.)
• WAN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make selections from the
following drop-down lists:
• Select Schedule
• Send to Lan Server