Specifications

Virtual Private Networking Using IPSec and L2TP Connections
233
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
Note: You cannot delete or edit an IKE policy for which the VPN policy is
active without first disabling or deleting the VPN policy.
Manually Add or Edit an IKE Policy
 To manually add an IKE policy for IPv4 or IPv6:
1. Select VPN > IPSec VPN. The IPSec VPN submenu tabs display with the IKE Policies
screen for IPv4 in view (see
Figure 158 on page 232).
2. Under the List of IKE Policies table, click the Add table button. The
Add IKE Policy screen
displays the IPv4 settings (see the next figure).
3. Specify the IP version for which you want to add an IKE policy:
• IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to Step 4.
• IPv6. Select the IPv6 radio button. The Add IKE Policy screen for IPv6 displays.
This
screen is identical to the Add IKE Policy screen for IPv4 (see the next figure).
Figure 159.