Installation guide
12 QS3200 User’s Manual Page 5
2.0 Package Contents - ProSwitch
Quad Series 3200
Examine the shipping container for obvious damage prior to installing this product. Notify the carrier of any damage
that you believe occurred during shipment. Ensure that the items listed below are included.
The QS3200 package contains the following:
QS3200 switch chassis
AC power cord
Rack mounting kit
Four rubber feet
User manual
Remove the items from the shipping container. Be sure to keep the shipping container should you need to re-ship
the unit at a later date. In the event there are items missing or damaged, contact the party from whom you
purchased the product. If the unit needs to be returned, please use the original shipping container if possible.
2.1 Product Description
The ProSwitch
Quad Series 3200 (QS3200) switches are multi-speed network devices combining copper and fiber
switch ports in speeds of 10/100 and 1000 in a single compact rack mountable chassis. By combining 10/100, 100
and 1000Mbps in one chassis, you can unclog your existing LAN and provide a path to efficient, high-speed
networking. The QS3200 switch’s four-slot chassis provides the flexibility to configure the switch to meet your
unique requirements. This flexibility is achieved via a family of ten available modules that can be integrated with the
base unit either in the factory or in the field to adapt the unit to meet your LAN requirements.
The QS3200 provides the switching speed and reliability to smoothly support multiple workgroups at 10/100Mbps or
1000 Mbps speed. The QS3200 offers the flexibility of two or four ports in 100Base-FX or eight ports in 10/100Base-
TX or 1 port of 1000BaseSX, LX, or TX in connector types of SC, ST, MTRJ or RJ45.
QS3200 Front and Rear Panels
This section describes the features on the front and rear panels of the QS3200 switch. All LED status indicators are
located on the FRONT panel of the switches. They provide a real-time indication of system and operational status.
The ports for connections to other devices and networks are also on the front panels, along with the crossover
switches.
Figure 1: Front Panel