Installation guide

12 ProSwitch

- Xtreme User’s Manual (Managed Models) Page 14
5.2.1 Manager
This level allows access to all console interface areas. Please change the default
Manager Password (Default password is manager) to limit access of unauthorized people to
the configuration area of the console interface.
5.2.2 Operator
This level allows access to the Status but does not allow Configuration capabilities.
On the Operator level, the Configuration Context, Download Application, and Reboot
Switch option are not accessible.
5.3 Password Security
1. Set a Manager password (and an Operator password, if applicable for your system).
2. Exit from the current console session.
3. A Manager password will now be required for full access to the console. Assuming
that both a Manager password and an Operator password have been set, the level of
access to the console interface will be determined by which password is entered in
response to the prompt. The manager and operator passwords control access to the
CMI.
Note: Passwords are case sensitive.
5.4 CMI: Setting Manager and Operator Passwords
Users can change or reset the Administrator (Manager) and user passwords through option
4.
5.4.1 Configuring Manager and Operator Passwords
This procedure prompts you to enter a password twice to help verify that you have correctly
entered the desired characters.
User can modify the Administrator password (Option 1) or User Password (Option 2)
through this menu.