MULTI-STAGE FILTRATION SYSTEM INSTALLATION INSTRUCTIONS Model #: 30101 Model #: 30102 Replacement Cartridge
INSTALLATION GUIDE ABOUT THIS SYSTEM Congratulations on your purchase of the 30101 Multi-Stage Filtration System. When properly maintained, this system will provide you with years of trouble-free service. The next three sections contain important information on the proper care and maintenance of your system, please take a few minutes to read through this information. BEFORE YOU BEGIN YOUR INSTALLATION: 1 Turn off water supply. 2 3 Observe all local plumbing codes. REQUIRED TOOLS: 1.
MULTI-STAGE FILTRATION SYSTEM INSTALLATION WATERSTONE COLD ONLY FILTRATION FAUCET BLUE HOSE KITCHEN FAUCET SUPPLY HOSE SUPPLY LINE CONNECTOR GREEN HOSE OPTIONAL - To prevent tangles, shorten hoses to desired length by cutting with utility knife or scissors. FILTRATION SYSTEM 1. 2. Turn off cold water at angle stop (A). Relieve water pressure by opening faucet handle. Remove cold water supply hose (B) from angle stop. B A Connect 3/4” supply line connector (C) snuggly onto angle stop.
. 6. 5. EXTEND 1/4” Slide compression nut (G) over end of blue supply tube (H). Slide ferrule (J) onto end of blue supply tube, long tapered end first. Push tube insert (K) into top of blue supply tube. K J Slide ferrule until 1/4” of tubing is showing out the end. G Insert extended portion of tubing and tighten compression nut to end of faucet shank with wrench. H SYSTEM ACTIVATION AND INSPECTION Check all tubing connections to ensure they are firmly seated.
CARTRIDGE REPLACEMENT - Model # 30102 Maintenance for the Multi-Stage Filtration System is quick and easy. All cartridges are designed to be changed without tools. When properly maintained, the system will provide you with years of trouble-free service. Cartridges in this system must be replaced every 6-12 months to maintain efficiency and to ensure high water quality. 2. 1. 3. B D A C Turn off cold water at angle stop (A) or feed water valve to the system (B).
SYSTEM WARRANTY The 30101 system limited warranty extends to the original purchaser of the system. This warranty covers all parts and factory labor needed to repair any manufacturer supplied item that proves to be defective in material, workmanship or factory preparation. The warranty applies for the first full calender year from date of purchase.
