Installation Sheet

3”
1 2 3 4
Turn o water supply. Observe all local
plumbing codes.
Inspect waste and water
supplies for signs of damage.
Replace as necessary.
DO NOT use petroleum
based products on this
faucet.
REQUIRED TOOLS:
1. Adjustable Wrench 2. Utility Knife
OPTIONAL MOUNTING HOLES
Although unit will stand on its’ own
under sink, unit can be mounted to
cabinet or wall if needed. Use mounting
holes on back to hang unit with screws.
BEFORE YOU BEGIN YOUR INSTALLATION:
INSTALLATION GUIDE
ABOUT THIS SYSTEM
Congratulations on your purchase of the 30101 Multi-Stage Filtration System. When properly maintained, this system will
provide you with years of trouble-free service. The next three sections contain important information on the proper care and
maintenance of your system, please take a few minutes to read through this information.
The following instructions outline a typical water treatment system installation. Consult local plumbing codes and building
regulations as they may pose dierent or additional requirements for the installation. The installer is responsible for ensuring
that the installation is in compliance with all applicable state and local regulations.
This system has been designed for installation by a licensed professional such as a contractor or plumber. Proper completion of
this installation will require basic familiarity with standard sink plumbing and proper use of common hand and power tools.
Improperly installed systems could result in water damage due to leaks or ooding.
The connection parts kit supplied with the 30101 Multi-Stage Filtration System includes components which represent the
most common under-sink plumbing connections currently in use within the United States. If these components do not match
the type of connections installed at your location, contact a local hardware or plumbing supplier to obtain the correct ttings.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before
or after the system.