TRADITIONAL BRIDGE FAUCET INSTALLATION INSTRUCTIONS Model #s: 6100-12 6100-18 6150-12 6150-18 6200 6250 6300 6350 6100-12 6150-12 6100-18 6150-18 6200 6250 6300 6350 7600-12 7600-18
INSTALLATION GUIDE BEFORE YOU BEGIN YOUR INSTALLATION: 1 2 Turn off water supply. 3 Observe all local plumbing codes. 4 Inspect waste and water supplies for signs of damage. Replace as necessary. REQUIRED TOOLS: DO NOT use petroleum based products on this faucet. PARTS INCLUDED: HK-BHC HANDLE BUTTON KIT (TRADITIONAL ONLY) 1. Adjustable Wrench 2. Phillips Screwdriver HK-USM1250 UNDER SINK MOUNTING HARDWARE KIT (1-1/4”) FAUCET HOLE PLACEMENT 1. Recommended deck hole 1-3/8”.
FAUCET INSTALLATION 1. 2. C C COUNTER OR SINK B A D B A Remove clamp nut (A) and washer (B) from threaded shroud (C). 3. D Fit flexible hoses (D) and rigid sidespray tube (E) through holes on counter or sink. (No plumbers putty is required. O-rings seals base). 4. F Slide washer and thread the clamp nut onto threaded shroud. Tighten nut snug to underside of sink or counter. E F Securely tighten clamp screws (F). CONNECTING SUPPLY HOSES 1.
OPTIONAL DECORATIVE BUTTONS 1. Place a small standard screwdriver in slot at bottom of metal ring that surrounds handle buttons. Gently pry button from faucet handle. 2. Position new button and snap in with thumb. COMPASS HOT AND COLD CROSS HANDLE LEVER HANDLE LEVER HANDLE FINISH MATCH CONNECTING OPTIONAL SIDE SPRAY 1. 2. 3. A G 4. COUNTER OR SINK B F D C E 1. Insert side spray base (A) into side spray hole on your sink or counter. No plumbers putty is required. O-ring seals base.
CARE AND CLEANING FOR WATERSTONE FAUCET FINISHES ATTENTION: Waterstone offers many finishes for it’s products. Every finish is unique and requires different techniques for care and cleaning. Find your product’s finish in the sections below, then carefully read and follow directions for that finish. CLEAR PROTECTIVE COATED FINISHES LIVING FINISHES ABOUT YOUR FINISH: These finishes have a clear protective coating on them. Even though they have a protective coating, they are only considered semi-durable.
CARE AND CLEANING FOR WATERSTONE FAUCET FINISHES (Cont.) PLATED FINISHES STAINLESS STEEL ABOUT YOUR FINISH: Black Nickel - BLN These finishes are the most durable finishes Waterstone offers. The best general maintenance is regular cleaning. Chrome - CH Even though these finishes are considered durable, you Polished Nickel - PN can never use any abrasive type cleaners, clothes, or pads Satin Chrome - SC to clean your fixture. Always try and keep your finishes clean and dry.
