TWO HANDLED KITCHEN FAUCET INSTALLATION INSTRUCTIONS 8020 8010-12 Model #s: 8010-12 8010-18 8020 8030 8030 8010-18
INSTALLATION GUIDE BEFORE YOU BEGIN YOUR INSTALLATION: 1 2 Turn off water supply. 3 Observe all local plumbing codes. 4 Inspect waste and water supplies for signs of damage. Replace as necessary. REQUIRED TOOLS: DO NOT use petroleum based products on this faucet. PARTS INCLUDED: *XX represents finish HK-THC-XX* HANDLE BUTTON KIT (TRADITIONAL ONLY) 1. Adjustable Wrench 2.
FAUCET INSTALLATION 1. 2. 3. 4. C COUNTER OR SINK D F E B A Remove clamp nut (A) and washer (B) from threaded shroud (C). Fit flexible hoses (D) and rigid side spray tube (E) through hole on counter or sink. (No plumbers putty is required. O-ring seals base). Slide washer and thread the clamp nut onto threaded shroud. Tighten nut snug to underside of sink or counter. CONNECTING SUPPLY HOSES 1. Before connecting supply hoses, flush supply stops to clear any debris.
CONNECTING OPTIONAL SIDE SPRAY 1. 2. A 3. G 4. COUNTER OR SINK B F D C E 1. Insert side spray base (A) into side spray hole on your sink or counter. No plumbers putty is required. O-ring seals base. Slide washer (B), thread attaching nut (C) and securely tighten. 2. Slide side spray hose (D) through side spray base. 3. Remove hose cap (E) from end of side spray hose tube (F) on faucet (G). 4. Connect and tighten end of side spray hose to side spray hose tube.
CARE AND CLEANING FOR WATERSTONE FAUCET FINISHES ATTENTION: Waterstone offers many finishes for it’s products. Every finish is unique and requires different techniques for care and cleaning. Find your product’s finish in the sections below, then carefully read and follow directions for that finish. CLEAR PROTECTIVE COATED FINISHES LIVING FINISHES ABOUT YOUR FINISH: These finishes have a clear protective coating on them. Even though they have a protective coating, they are only considered semi-durable.
CARE AND CLEANING FOR WATERSTONE FAUCET FINISHES (Cont.) PLATED FINISHES STAINLESS STEEL ABOUT YOUR FINISH: Black Nickel - BLN These finishes are the most durable finishes Waterstone offers. The best general maintenance is regular cleaning. Chrome - CH Even though these finishes are considered durable, you Polished Nickel - PN can never use any abrasive type cleaners, clothes, or pads Satin Chrome - SC to clean your fixture. Always try and keep your finishes clean and dry.
