Specification Sheet

41180 Raintree Court • Murrieta, CA 92562 • 1-888-304-0660 • 951-304-0520 • www.waterstoneco.com
REVISED: 10-1-17
Stop the flood! Faucet water inlets and filtration system valves
could fail at any time. Kitchen flooding often happens without
warning and can cause substantial flooding and property damage if
nobody is around to stop it. Waterstone’s Safety Valve Leak Detector
automatically shuts off the water source when it detects moisture.
Once the valve shuts off, the unit sounds off with an audible alarm,
like a smoke detector, to let you know of a problem. The unit doubles
as a standard shut-off for water filter cartridge replacement and is
easy to install.
SPECIFICATIONS
Operating voltage : 9V DC
Supply current: Typical 1.0 mA, maximum 15.0 mA.
Cable length: 60”
Inlet/Outlet direct connect: 1/2” MPT (male pipe thread)
Inlet/Outlet adapter: 1/4” or 3/8” quick connect
Sensor size: 2.125”(L) x 2.75”(W) x 1.25”(H)
Environment temperature : 33ºF to 140ºF
Maximum pressure : 87psi
Body material: Polyoxymethylene (POM)
Standard warranty: One-year limited warranty for product defects in material and workmanship
Product Description
• Auto shut off when water is detected.
• Colored LED indicators and audio alarm.
• Quick connect for easy installation.
• User friendly product design with one button reset.
• Accurate, stable and reliable quality.
• Has both 1/4” and 3/8” quick connect fittings included.
• Use with Waterstone Hot Tank and/or Filtration unit.
Manufactured for Waterstone LLC by Savant Electronics.
Model # AS-414
SAFETY VALVE-LEAK DETECTION UNIT