FILTRATION FAUCET INSTALLATION INSTRUCTIONS Filtration Model #s: 1100H 1425H 1100C 1425C 1100HC 1425HC 1150H 1700H 1150C 1700C 1150HC 1700HC 1200H 1750H 1200C 1750C 1200HC 1750HC 1250H 1900H 1250C 1900C 1250H 1900HC 1400H 1400C 1400HC 1100H 1100C 1100HC 1150H 1150C 1150HC 1200H 1200C 1200HC 1250H 1250C 1250HC 1400H 1400C 1400HC 1425H 1425C 1425HC 1700H 1700C 1700HC 1750H 1750C 1750HC 1900H 1900C 1900HC
INSTALLATION GUIDE BEFORE YOU BEGIN YOUR INSTALLATION: 1 2 Turn off water supply. 3 Observe all local plumbing codes. REQUIRED TOOLS: 1. Adjustable Wrench 4 Inspect waste and water supplies for signs of damage. Replace as necessary. PARTS INCLUDED: COLD ONLY HK-CFF-XX* COLD ONLY FITRATION HARDWARE KIT DO NOT use petroleum based products on this faucet.
HOT AND COLD FILTRATION FAUCET INSTALLATION 1. 2. 3. A B C 4. G COUNTER OR SINK H D F E Slide escutcheon plate (A) and clear vinyl washer (B) onto threaded shroud (C) and up to base of faucet. Fit flexible hoses (D, E, F) through hole on counter or sink. (No plumbers putty is required. Vinyl washer seals base). Slide washer (G) and thread the nut (H) onto threaded shroud. Hand tighten nut to underside of sink or counter. Turn faucet to the desired handle position.
COLD ONLY FILTRATION FAUCET INSTALLATION 1. 2. 3. A B C COUNTER OR SINK D E F Slide escutcheon plate (A) and clear vinyl washer (B) onto threaded shroud (C) and up to base of faucet. Fit faucet shank through hole on counter or sink. (No plumbers putty is required. Vinyl washer seals base). Slide large washer (D) and star lock washer (E) onto shank. Thread the nut (F) and hand tighten underside of sink or counter. 4. 5. 6. Slide compression nut (G) over end of supply tube.
CARE AND CLEANING FOR WATERSTONE FAUCET FINISHES ATTENTION: Waterstone offers many finishes for it’s faucet product line. Every finish is unique and requires different techniques of care and cleaning. Find your faucet’s finish in sections below, then carefully read and follow directions for that finish. ABOUT YOUR FINISH: These finishes have a clear protective coating on them. Even though they have a protective coating, they are only considered semi-durable.
ABOUT YOUR FINISH: Weathered Copper - WC This finish is considered a Living Finish and has NO PROTECTIVE COATING on the surface. Living finishes are finishes that have a very shallow patina on their surface. Essentially, the finish is what nature would do to the surface over a long period of time. The finishes are intended to change with time and generally darken slightly where they are not being touched, and highlight where the high use points are on the fixture.
