BRIDGE FAUCET INSTALLATION INSTRUCTIONS 6100-12 6150-12 6100-18 6150-18 6200 6250 6300 6350 Model #s: 6100-12 6100-18 6150-12 6150-18 6200 6250 6300 6350 7600-12 7600-18 7800 7825 7600-12 7600-18 7800 7825
INSTALLATION GUIDE BEFORE YOU BEGIN YOUR INSTALLATION: 1 2 Turn off water supply. 3 Observe all local plumbing codes. 4 Inspect waste and water supplies for signs of damage. Replace as necessary. REQUIRED TOOLS: DO NOT use petroleum based products on this faucet. PARTS INCLUDED: HK-USM1250 UNDERSINK MOUNTING HARDWARE (1-1/4”) 1. Adjustable Wrench 2. Phillips Screwdriver FAUCET HOLE PLACEMENT 1. Recommended deck hole 1-3/8”. Drill holes for bridge faucet in mounting surface 8” on center.
FAUCET INSTALLATION 1. 2. C C COUNTER OR SINK B A D B A Remove clamp nut (A) and washer (B) from threaded shroud (C). 3. D Fit flexible hoses (D) and rigid sidespray tube (E) through holes on counter or sink. (No plumbers putty is required. O-rings seals base). 4. F Slide washer and thread the clamp nut onto threaded shroud. Tighten nut snug to underside of sink or counter. E F Securely tighten clamp screws (F). CONNECTING SUPPLY HOSES 1.
CONNECTING OPTIONAL SIDE SPRAY 1. 2. 3. G A 4. COUNTER OR SINK B F D C Insert side spray base (A) into side spray hole on your sink or counter. No plumbers putty is required. O-ring seals base. Slide washer (B), thread attaching nut (C) and securely tighten. E Slide sidespray hose (D) through side spray base. Remove hose cap (E) from end of sidespray hose tube (F) on faucet (G). Connect and tighten end of sidespray hose to sidespray hose tube. Check for leaks.
