User`s manual

Safety Information in this Manual
Note, caution and warning symbols appear throughout this book to draw your
attention to important operational and safety information.
A “NOTE” marks a short message to alert you to an important detail.
A “CAUTION” safety alert appears with information that is important for
protecting your equipment and performance.
A “WARNING” safety alert appears with information that is important for
protecting you, others and equipment from damage. Pay very close attention
to all warnings that apply to your application.
The ç symbol (an exclamation point in a triangle) precedes a general
CAUTION or WARNING statement.
The Ó symbol (a lightning bolt in a lightning bolt in a triangle) precedes an
electric shock hazard CAUTION or WARNING safety statement.
Tec
hnical Assistance
If you encounter a problem with your Watlow controller, see the Trouble-
shooting Table in the Appendix and review all of your configuration
information to verify that your selections are consistent with your application:
inputs; outputs; alarms; limits; etc. If the problem persists after checking the
above, you can get technical assistance from your local Watlow representative,
or by dialing [phone], 7:00 a.m. to 5:00 p.m. Central Standard Time.
An applications engineer will discuss your application with you.
Please have the following information available when you call:
• Complete model number • All configuration information
• User’s Manual • Diagnostic Menu readings
Warranty and return information are on the back cover of this
manual.
Your
Comments
Your comments or suggestions on this manual are welcome. Please send them
to the Technical Literature Team, Watlow Winona, 1241 Bundy Boulevard,
P.O. Box 5580, Winona, Minnesota, 55987-5580 U.S.; Telephone: [phone]-
5300; fax: [phone]. The Power Series User’s Manual is copyrighted
by Watlow Electric Manufacturing, Inc., © 2015, with all rights reserved.
ç
Safety Alert
CAUTION or
WARNING
∫
Electrical
Shock Hazard
CAUTION or
WARNING