User`s manual

12
WATLOW Series 945 High/Low Limit User's Manual
Setup
Setup Parameters Value Range Factory Default
LOC 0 - 2 0
In J, K (appears as H), t, n, c, Pt2, t
rtd, rt.d, 0-5, 420
Dependent on model number.
dEC 0, 0.0, or 0.00 0
Dependent on input type.
C _ F C or F F
Will not appear if In = 0-5 or 420.
rL rL to rH Input selection dependent.
rH rH to rL Input selection dependent.
AtyP Pr or dE Pr
LAt LAt or nLA LAt
HYS 1°F - 99°F, 1°C - 55°C, 1U - 99U 3°F
0.1°F - 9.9°F, 0.1°C - 5.5°C, 0.1U - 9.9U
rtd JIS or din DIN
bAUd 300, 600, 1200, 2400, 4800, 9600 1200
dAtA 7 o = Odd parity, 7 E = Even parity 7 o
8 n = 8 data bits and no parity
Prot FULL or On FULL
Addr 0 to 31 0
Log OFF, tAbL or CHrt OFF
LinE 10 to 127 65
YEAr 0 to 99 92
Mon 1 to 12 01
Day 1 to 31 01
Hour 0 to 23 0
Min 0 to 59 0
Int 0.0 to 60.0 minutes 0.0
tag PtA, Pt, P-A, P--, -tA, -t-, --A, --- ---
P = Process, T = Target
A = Alarm Set points
Setup Menu
Use this page as a master copy for configuring your Series 945.
Do not enter any values here; make photocopies instead.
Table 2 -
Setup Menu
Prompts and
Descriptions.