Controller Protection For Over-Temperature Hazard Brochure

Ordering Information
9 4 - 1 - 0 0
Series 94
Microprocessor-based
1
⁄ 16 DIN, single input, dual output
4-digit displays
NEMA 4X (IP65)b Option
A = Without NEMA 4X (IP65) Rating
B = With NEMA 4X (IP65) Rating
CE Option
A = Non CE Compliant
B = CE Compliant
Output 1 (Limit)
D = Electromechanical relay, Form C, 5A,
without contact suppression
ac
Output 2 (Alarm)
A = None
C=
Switched dc output, non-isolated
D = Electromechanical relay, Form C, 5A,
without contact suppression
ac
K = Solid state relay, Form A, 0.5A, without
contact suppression
c
Line Voltage/Power
0=
100-240V~ (high voltage)
1= 12-24Vı(ac/dc) (low voltage)
Display
Upper/Lower
RR = Red/Red
RG = Red/Green
GR = Green/Red
GG = Green/Green
a Electromechanical relays are not recommended for PID
control. They are warranted only for 100,000 contact closures.
b To effect NEMA 4X (IP65) rating requires a minimum
mounting panel thickness of 0.06 inch (1.5 mm) and surface
finish not rougher than 0.000032 inch (0.000812 mm).
c Switching inductive loads (relay coils, etc.) requires using an
RC suppressor.
Specifications
Control Mode
• Microprocessor-based
• Single input, dual output
• Limit and alarm
Agency Approval
• FM approved, Class 3545, File J.I. 0D5A1.AF
Operator Interface
• Sealed membrane front panel
• Dual, 4-digit red or green displays
• Advance, Increment, Decrement, and Reset keys
Accuracy
•
Calibration accuracy and sensor conformity: ±0.1% of span,
±1
°C @ 77°F ± 5°F/25 ° C ± 3 ° C ambient and rated line
voltage
• Accuracy span: 1000°F/540°C minimum
• Temperature stability: ±0.2°F/°F or ±0.1°C/°C rise in
ambient maximum
•
Voltage stability: ±0.01% of span per percent of rated line voltage
Sensors/Inputs
• Thermocouple, grounded or ungrounded sensors
• RTD 2- or 3-wire, platinum, 100Ω @ 0°C calibration to DIN
curve (0.00385Ω/Ω/°C) or JIS curve (0.003916Ω/Ω/°C); user
selectable
• Sensor break protection de-energizes limit output to
protect system
• °F or °C display, user selectable
Input Range
Specified temperature ranges represent the controller’s
operational span.
• Thermocouple
Type B 32 to 3308°F or 0 to 1820°C
Type J 32 to 1382°F or 0 to 750°C
Type K -328 to 2282°F or -200 to 1250°C
Type N 32 to 2282°F or 0 to 1250°C
Type S 32 to 2642°F or 0 to 1450°C
Type T -328 to 662°F or -200 to 350°C
• RTD Resolution (DIN or JIS)
1° -328 to 1292°F or -200 to 700˚C
0.1° -199.9 to 999.9°F or -199.9 to 700.0˚C
Output 1 Limit
• Electromechanical relay
Output 2 Alarm
• Electromechanical relay
• Switched dc
• Solid state relay
Output Specifications
• Electromechanical relay
c
, Form C, 5A @ 120/240V~
or 30VÎ(dc) maximum, rated resistive load, without contact
suppression.
• Switched dc signal provides a non-isolated minimum turn on
voltage of 3VÎ(dc) into a minimum 500Ω load,
maximum on voltage not greater than 12VÎ(dc) into an
infinite load.
• Solid state relay
c
, Form A, 0.5A @ 24V~ min. to
265V~ max. Opto-isolated, without contact
suppression. Off state output impedance is 31MΩ.
Output Configurations
Output 1 selections: Limit Control
• Limit output
Output 2 selections:
• Process with flashing alarm message
• Process without alarm message
• Alarm with separate high and low set points
• Hysteresis: 1 to 9999°C/°F
Line Voltage/Power
• 100-240V~ (85-264V~); 50/60Hz ±5%
• 12-24Vı(ac/dc) (10-26ı[ac/dc]); 50/60Hz ±5%
• Power consumption 7VA (12 to 24 Vı[ac/dc])
12VA (100-240 V~)
• Data retention upon power failure via non-volatile memory
Operating Environment
• 32 to 149°F/0 to 65°C at 115
V~ line voltage power
• 32 to 140° F/0 to 60 ° C at 230V~ line voltage power
• 0 to 90% RH, non-condensing
• Storage temperature: -40° to 185°F/-40° to 70°C
Terminals
• Size 6 universal head screw terminals accepts 20-14 gauge wire
Dimensions
Height 2.1" 53 mm
Width 2.1" 53 mm
Overall Depth 4.7" 119 mm
Behind panel depth 4.1" 104 mm
Weight 0.5 lb 0.2 kg
United States Sales Offices: Atlanta/Greenville, [phone] • Austin, [phone] • Charlotte/Columbia, [phone] •
Chicago, [phone] • Cincinnati, [phone] • Cleveland, [phone] • Dallas, [phone] • Denver, [phone] •
Detroit, [phone] • Houston, [phone] • Indianapolis, [phone] • Kansas City, [phone] • Los Angeles, [phone] •
Maryland/Virginia, [phone] • Minneapolis, [phone] • Nashville, [phone] • New England, [phone] •
New York/New Jersey/Philadelphia, [phone] • New York, Upstate, [phone] • Orlando, [phone] • Phoenix, [phone] •
Pittsburgh, [phone] • Portland, [phone] • St. Louis, [phone] • Sacramento, [phone] • San Diego, [phone] •
San Francisco, [phone] • Seattle, [phone] • Tampa/St. Petersburg, [phone] • Tulsa, [phone] •
Winston Salem/Raleigh, [phone] • Wisconsin, [phone]
Asian Sales Offices: Australia, [phone] • China, [phone] • Japan, [phone] • Korea, [phone] •
Singapore, [phone] • Taiwan, [phone] European Sales Offices: France, [phone] • Germany, [phone] •
Italy, [phone] • United Kingdom, [phone] Latin American Sales Office: Mexico, [phone]
For other product information, call Watlow’s FAX REPLY: United States [phone] • Outside the United States [phone]
WIN-94-109 11/1/99 11:47 AM Page 2