Owner manual

36 CLS User’s Guide

Installation

The next table shows scaling resistor values.

The following tables show the location of RA, RB, RC and RD on the

analog input boards of the 4CLS and the 8CLS. (The analog input board

is the upper board of the two-board set.)

Input Range RA RB RC RD

All T/C, 0-60 mV DC Jumper

RTD 1: -100.0 to

275.0

RTD 2: -120 to 840

10.0 Kohms

25.0 Kohms

10.0 Kohms

25.0 Kohms

80 ohms

100 ohms

0-10 mA DC

0-20 mA DC

Jumper

6.0 ohms

3.0 ohms

0-100 mV

0-500 mV

499 ohms

5.49 Kohms

750 ohms

0-1 VDC

0-5 VDC

0-10 VDC

0-12 VDC

6.91 Kohms

39.2 Kohms

49.9 Kohms

84.5 Kohms

422.0 ohms

475.0 ohms

301.0 ohms

422.0 ohms