Owner manual

Installation
CLS User’s Guide 37
4CLS: Voltage/Current Inputs
8CLS: Voltage/Current Inputs
4CLS: RTD/Thermister Inputs
8CLS: RTD/Thermister Inputs
Place resistors RA, RB and RD in the resistor pair locations this way:
A wire trace on the printed circuit board jumpers the RC position. When
you place a resistor in the RC position, cut the wire trace that connects
the two resistor terminals.
Loop # RC RD
158 RP1
256 RP2
354 RP3
452 RP4
Loop RC RD Loop RC RD
158RP1550RP5
256RP2648RP6
354RP3746RP7
452RP4844RP8
Loop # RA/RB RC
1RP157
2RP255
3RP353
4RP451
Loop RA/RB RC Loop RA/RB RC
1RP157 5RP549
2RP255 6RP647
3RP353 7RP745
4RP451 8RP843