Owner manual

52 CLS User’s Guide
Using the CLS
Ramp/Soak
If Ramp/Soak is installed on your controller, press the Ramp/Soak key
to:
•
Assign a ramp/soak profile to the current loop.
•
Perform operations on an assigned profile.
•
See the status of a running profile.
NOTE
Your CLS may not have the Ramp/Soak feature. If it does not,
then the Ramp/Soak key will not operate. If you press the
Ramp/Soak key, you'll see the following message:
Alarm Ack
Press Alarm Ack to acknowledge an alarm condition and reset the
global alarm digital output.
LOOP PROCESS UNITS
ALARM SETPOINT STATUS OUT%
OPTION
UNAVAILABLE