Owner's manual

EZ-ZONE PM Limit Express • 12 • Install & Wiring

Power

power

Slot C

fuse

• 47 to 63 Hz

• 10VA maximum power consumption (PM3 and PM6)

• 14VA maximum power consumption (PM4, 8 and 9)

Low Power

• 12 to 40VÎ (dc)

• 20 to 28VÅ (ac) Semi Sig F47

High Power

•85to264VÅ(ac)

•100to240VÅ(ac)SemiSigF47

Warning:

Use National Electric (NEC) or other country-specific

standard wiring and safety practices when wiring and

connecting this controller to a power source and to

electrical sensors or peripheral devices. Failure to do

so may result in damage to equipment and property,

and/or injury or loss of life.

Note:

Maximum wire size termination and torque rating:

• 0.0507 to 3.30 mm2 (30 to 12 AWG) single-

wire termination or two 1.31 mm2 (16 AWG)

• 0.8 Nm (7.0 lb.-in.) torque

Note:

Adjacent terminals may be labeled differently, de-

pending on the model number.

Note:

To prevent damage to the controller, do not connect

wires to unused terminals.