Owner manual

Watlow EZ-ZONE
®
PM Integrated Controller • 176 • Chapter11Appendix
set point low limit 127
Set Point Low Limit Open Loop 84
Setup Page 67
Sides
Alarm 89
Limit 79
Silencing 90, 137
single set point ramping 135
Soak 111
Software Build 116
Software Conguration 144
Software Revision 116
Source 88
Source Function A 68
Source Function E 68
Source Instance A 68
Source Instance E 68
Special Output Function Menu 64
Starting a Prole 104
Synchronized Variable Time Base 97
T
Target Set Point 107
temperature units indicator lights 42
Ten Point Linearization 128
Thermistor 69
Time 111
Time Base 75, 76, 86
Time Derivative 60, 81, 123, 133
Time Integral 60, 81, 123, 133
TRU-TUNE+™ Band 82, 124
TRU-TUNE+™ Enable 81, 124
TRU-TUNE+™ Gain 82, 124
tuning the PID parameters 123
Type 88, 136
U
Unused Step 111
Up Key 42
upper display 42
User Failure Action 83
User Password 115
User Restore Set 97
User Save Set 97, 122
User Tune Aggressiveness 123
Using EZ-ZONE® Congurator Software 144
using the software 139
V
Valve Travel Time 68
variable time base 134
W
Wait Event (1 and 2) 108, 109
Wait For Both 111
Wait For Process Instance 108
Wait For Time 107
weight 170
wiring
digital input or output 5 25, 26
digital input or output 6 26
EIA-232/485 Modbus RTU communications 35
high power 25
input 1 process 27
input 1 RTD 26
input 1 thermocouple 26
input 2 current transformer 27
input 2 thermocouple 27
low power 25
Modbus RTU or standard bus EIA-485 communications
34
output 1 mechanical relay, form C 31
output 1 switched dc/open collector 28, 29
output 1 universal process 31
output 2 mechanical relay, form A 33
output 2 no-arc relay, form A 33
output 2 solid-state relay, form A 33
output 2 switched DC/open collector 32
standard bus EIA-485 communications 34
X
Y
Z
zone display 42