Instruction Manual

Watlow EZ-ZONE
®
PM Limit Controller • 63 • Chapter 6 Setup Page
Setup Page
Dis-
play
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Pro-
fibus
Index
Param-
eter ID
Data
Type
&
Read/
Write
[iP;g1]
[ip.g1]
Communications (2)
Fixed IP Gateway
Part 1
0 to 255 0 - - - - - - - - - - - - 17026 - - - -
[iP;g2
[ip.g2]
Communications (2)
Fixed IP Gateway
Part 2
0 to 255 0 - - - - - - - - - - - - 17027 - - - -
[iP;g3]
[ip.g3]
Communications (2)
Fixed IP Gateway
Part 3
0 to 255 0 - - - - - - - - - - - - 17028 - - - -
[iP;g4]
[ip.g4]
Communications (2)
Fixed IP Gateway
Part 4
0 to 255 0 - - - - - - - - - - - - 17029 - - - -
[iP;g5]
[ip.g5]
Communications (2)
Fixed IP Gateway
Part 5
0 to 255 0 - - - - - - - - - - - - 17030 - - - -
[iP;g6]
[ip.g6]
Communications (2)
Fixed IP Gateway
Part 6
0 to 255 0 - - - - - - - - - - - - 17031 - - - -
[Mb;E]
[Mb.E]
Communications (2)
Modbus TCP Enable
Activate Modbus TCP.
[`YES} Yes
[``no] No
Yes - - - - - - - - - - - - 17041 - - - -
[EiP;E]
[EiP.E]
Communications (2)
EtherNet/IP™ Enable
ActivateEthernet/IP™.
[`YES} Yes
[``no] No
Yes - - - - - - - - - - - - 17042 - - - -
[ao;nb]
[Ao.nb]
Communications (2)
CIP Implicit Assem-
bly Output Member
Quantity
1to20 20 - - - - - - - - - - - - 24009 - - - -
[ai;nb]
[Ai.nb]
Communications (2)
CIP Implicit Assembly
Input Member Quan-
tity
1to20 20 - - - - - - - - - - - - 24010 - - - -
[`C_F]
[ C_F]
Communications (2)
Display Units
Select which scale to
use for temperature
passed over communica-
tions port 2.
[```F]°F(30)
[```C]°C(15)
°F Instance 2
Map 1 Map 2
- - - - 2990
0x96(150)
1
6
199 17050 uint
RWE
[Map]
[ Map]
Communications (2)
Data Map
Ifsetto1thecontrol
will use PM legacy map-
ping. If set to 2 the con-
trol will use new map-
ping to accommodate
new functions.
1to2 1if9
th
digit
of part
number
isa1
other-
wise, 2
- - - - - - - - - - - - 17059 - - - -
Note:
Some values will be rounded off to fit in the four-character display. Full values can be read
with other interfaces.
* These parameters/prompts are available in this menu with firmware revisions 11.0 and
above.
R: Read
W: Write
E: EEPROM
S: User Set