Instruction Manual

PPC-2000 User’s Guide Chapter 2: Hardware Installation
Doc.# 30002-00 Rev 2.3 Watlow Anafaze 77
Connecting Power
PPC-IPS-2 Power Supply
The PPC-IPS-2 accepts two ranges of voltages. Connections are
made at screw terminals.
Table 2.25 PPC-IPS-2 Voltage Input Switch
Settings
ç
CAUTION! The PPC-IPS-2 accepts two ranges of voltage. Be sure
to set the switch to the appropriate range before
applying power.
Processor Module
The processor module accepts 10 to 28Vdc. Connect the
terminal labeled +V on the PPC-2010 to the DC power and the
terminal labeled C to the DC common. See Table 2.26 for
connections for the two power supplies.
Table 2.26 Power Supply Connections
Figure 2.67 on page 78 illustrates the connections when using
the PPC-IPS-2.
IPS-2 Switch
Setting
Input Voltage
Range
Input
Frequency
115V 88-132Vac
47-440Hz
230V 176-264Vac
PPC-2010 IPS-2
+V V2
C COM