Instruction Manual

PPC-2000 User’s Guide Chapter 3: Operating with AnaWin 3
Doc.# 30002-00 Rev 2.3 Watlow Anafaze 135
Outputs
The Outputs spreadsheet lists the output value for each of the
analog outputs. Output behavior is set by the parameters of the
channel with the output set as the output destination on the
Channels spreadsheet.
Figure 3.23 Outputs Spreadsheet
Select the Outputs button to monitor the analog output values.
Analog Output names are located in the first column. The
Analog Output names identify the module, I/O type (if
necessary), and module I/O number. The module type is
abbreviated in the default I/O name. For example, PPC1:EIAO
11.3.2 indicates PPC #1, the encoder input analog output
module with module address 11, I/O type (3 = analog out), and
output #2. See Figure 3.24 and Table 3.19.
Figure 3.24 Analog Output Names
Table 3.19 Module Abbreviations Seen on the
Outputs Spreadsheet
There is only one parameter on the Outputs spreadsheet: Value.
Module Type Abbreviation
PPC-2030 Encoder Input Analog Output EIAO
PPC-205x Analog Output AO
PPC1:EIAO. 11. 3. 2
module address
controller number
module type
module I/O number
I/O type