Instruction Manual

List of Tables PPC User’s Guide
xiv Watlow Anafaze Doc.# 30002-00 Rev 2.3
Operating with AnaWin3 89
Table 3.1—Control Types PID1 and PID2 91
Table 3.2—Alarm Types 95
Table 3.3—Range and Sensitivity of theCustom Linear Input Types 99
Table 3.4—PV Range permitted for various Decimal Places Settings 100
Table 3.5—Scaling Parameters for 0-10Vdc Linear Input Example 101
Table 3.6—Scaling Parameters for 4-20mA Linear Input Example 101
Table 3.7—Scaling Parameters for 0-1Vdc Linear Input Example 102
Table 3.8—Retransmit Channel Parameter Settings 104
Table 3.9—Primary Channel Parameter Settings 107
Table 3.10—Secondary Channel Parameter Settings 108
Table 3.11—Ratio Channel Parameter Settings 111
Table 3.12—AnaWin3 Control Types 118
Table 3.14—Module Abbreviations Seen on the Inputs Spreadsheet 127
Table 3.16—Units 131
Table 3.18—Function Values 134
Table 3.19—Module Abbreviations Seen on the Outputs Spreadsheet 135
Table 3.20—System Status 139
Table 3.21—Global Settings 139
LogicPro and Modbus Reference 159
Table 5.1—Parameter Names & Abbreviations 159
Table 5.2—Example Database Table 160
Table 5.3—Addresses for Analog Inputs on the PPC-202x Modules 164
Table 5.4—Addresses for Encoder Inputs on the PPC-2030 Encoder In Analog Out
Module 165
Table 5.5—Addresses for Counter Inputs on the PPC-2010 Processor Module 166
Table 5.6—Addresses for Soft Inputs and Channel Outputs 166
Table 5.7—Addresses for Encoder Inputs on the PPC-2040 Digital I/O Modules 167
Table 5.8—Input Parameters 168
Table 5.9—Input Status 169
Table 5.11—Temperature Scale Conversion 171
Table 5.13—Process Variable and Setpoint Source Settings for Analog Inputs on the
PPC-202x Modules 176
Table 5.16—Process Variable and Setpoint Source Settings for Soft Input and
Channel Out Registers 178
Table 5.18—Control Mode 180
Table 5.19—Control Types 181
Table 5.21—Heat/Cool Curve 184
Table 5.22—Output Destinations for Digital Outputs on the PPC-2010 Module 186
Table 5.26—Output Destinations for Analog Outputs on the PPC-205x Modules 189
Table 5.27—Output Destinations for Soft Boolean and Soft Integers 190
Table 5.28—Alarm Status 190
Table 5.30—Alarm and Control Functionality 192
Table 5.31—Alarm Acknowledge 192
Table 5.32—Alarm Enable/Disable 192
Table 5.33—Database Offsets and Sample Modbus Addresses for Digital I/O 196
Table 5.37—Digital I/O Uses 200