Instruction Manual

PPC-2000 User’s Guide Chapter 5: LogicPro and Modbus Reference
Doc.# 30002-00 Rev 2.3 Watlow Anafaze 179
Table 5.17 Process Variable and Setpoint Source
Settings for Counter Inputs on the
PPC-2040 Modules
NOTE! The range of values and the precision of the Process
Variable and Setpoint depend on the Input Type of the
analog input selected as the Process Variable Source
for the channel. See Table 5.10 on page 170.
Process Variable
This register contains the actual value measured by the sensor
attached to the input set as the Process Variable Source for the
channel (see above). The process variable is used in the
channel’s feedback calculation. This register is read-only.
Values
Input Name
(AnaWin3 Input Spreadsheet)
301
302
303
304
PPC1:DIO 21.1.1 C
PPC1:DIO 21.2.1 F
PPC1:DIO 21.1.2 C
PPC1:DIO 21.2.2 F
305
306
307
308
PPC1:DIO 22.1.1 C
PPC1:DIO 22.2.1 F
PPC1:DIO 22.1.2 C
PPC1:DIO 22.2.2 F
309
310
311
312
PPC1:DIO 23.1.1 C
PPC1:DIO 23.2.1 F
PPC1:DIO 23.1.2 C
PPC1:DIO 23.2.2 F
313
314
315
316
PPC1:DIO 24.1.1 C
PPC1:DIO 24.2.1 F
PPC1:DIO 24.1.2 C
PPC1:DIO 24.2.2 F
317
318
319
320
PPC1:DIO 25.1.1 C
PPC1:DIO 25.2.1 F
PPC1:DIO 25.1.2 C
PPC1:DIO 25.2.2 F
321
322
323
324
PPC1:DIO 26.1.1 C
PPC1:DIO 26.2.1 F
PPC1:DIO 26.1.2 C
PPC1:DIO 26.2.2 F