Instruction Manual

Chapter 5: LogicPro and Modbus Reference PPC-2000 User’s Guide
210 Watlow Anafaze Doc.# 30002-00 Rev 2.3
Table 5.53 Full Scale Readings
Zero Reference
The values stores in the Zero Reference registers are the
readings from the low voltage reference. These readings are
used in conjunction with the Full Scale reading to scale the
analog input readings.
Table 5.54 Zero Reference Readings
Database
Offset
Module
Address
Range
Reference
Voltage
1 1 -1 to 10V 10V
2 1 -5 to 50mV 50mV
3 2 -1 to 10V 10V
4 2 -5 to 50mV 50mV
5 3 -1 to 10V 10V
6 3 -5 to 50mV 50mV
7 4 -1 to 10V 10V
8 4 -5 to 50mV 50mV
Database
Offset
Module
Address
Range
Reference
Voltage
1 1 -1 to 10V 0V
2 1 -0.5 to 5V 0V
3 1 -0.1 to 1V 0V
4 1 -50 to 500mV 0V
5 1 -10 to 100mV 0V
6 1 -5 to 50mV 0V
7 2 -1 to 10V 0V
8 2 -0.5 to 5V 0V
9 2 -0.1 to 1V 0V
10 2 -50 to 500mV 0V
11 2 -10 to 100mV 0V
12 2 -5 to 50mV 0V
13 3 -1 to 10V 0V
14 3 -0.5 to 5V 0V
15 3 -0.1 to 1V 0V
16 3 -50 to 500mV 0V
17 3 -10 to 100mV 0V
18 3 -5 to 50mV 0V
19 4 -1 to 10V 0V
20 4 -0.5 to 5V 0V
21 4 -0.1 to 1V 0V
22 4 -50 to 500mV 0V
23 4 -10 to 100mV 0V
24 4 -5 to 50mV 0V