Instruction Manual

PPC-2000 User’s Guide Chapter 7: Specifications
Doc.# 30002-00 Rev 2.3 Watlow Anafaze 233
Table 7.6 Connections
Table 7.7 Power Specifications
Table 7.8 Capacity and Programming
Power Terminals Captive screw cage clamp
Power Wire Gauge 24 to 12 AWG
Power Terminal Torque 0.5 to 0.6 Nm (4.4 to 5.3 in.-lb)
Connector on Module SCSI-2 female
Mounting DIN rail or panel mount
Port 1 and Port 2 See
Table 7.13 on page 235
System Power Requirement 12 to 26 ± 2 Vdc
Power 3 W typical
Current (@ 12Vdc) 250mA typical @ 25ºC
Current (@ 24Vdc) 125mA typical @ 25ºC
Max. Voltage between Ground
and Common
40Vdc
Digital I/O Points on Processor 46
Max. Number Digital I/O Points 288
Max. Number of Counter Inputs 17
Max. Number of Additional I/O Mod-
ules
9
Max. Number of Analog Inputs 128
Max. Number of Analog Outputs
(not counting DACs/SDACs)
48 (Requires 4 PPC-2030 and
4 PPC-2050.)
Program Capacity
Logic program memory:
128 kB. Data memory in
battery-back RAM: 60 kB
Programming Language
IEC1131-3 compliant Ladder
Diagram, SFC, and FBD
Number of Instructions
7 logic instructions, 42 applied
instructions
Logic Program Storage Flash memory
Logic Programming Software
LogicPro
Operating System for Programming
Software
Windows95/98,
WindowsNT