Instruction Manual

Chapter 7: Specifications PPC-2000 User’s Guide
242 Watlow Anafaze Doc.# 30002-00 Rev 2.3
Table 7.25 Connections
Table 7.26 Power Specifications
Table 7.27 Input Specifications
Mounting DIN rail or panel mount
Terminals Captive screw cage clamp
Connector
High Density D-sub 15 female
contact
Screw Terminal Wire Gauge 24 to 16 AWG
Screw Terminal Torque 0.22 to 0.25 Nm (1.9 to 2.2 in-lb.)
Power Requirement 10.8 W typical
Current (@ 12Vdc) 900mA typical @ 25ºC
Current (@ 24Vdc) 450mA typical @ 25ºC
Modules per Processor 4
Encoder Inputs 4
Maximum Input Frequency 10 kHz
Max Counts
10,000 counts/sec single phase
32,000 counts/sec quadrature
Sample Rate 250 ms to sample all 4 inputs (4 Hz)
Pulse Input Voltage Range:
Single-ended
Pulse Input Voltage Range:
Differential
±14.0 max., 0.0 to 5.0V
nominal
Input Current: Single-ended ± 1.0mA
Input Current: Differential ± 3.0mA
Count Range 16 bits
Power for Encoders 5V @ 240mA max.
3.0 V V
hi
5.0 V≤<
0.0 V V
lo
2.0 V<≤