Instruction Manual

Chapter 2: Hardware Installation PPC-2000 User’s Guide
32 Watlow Anafaze Doc.# 30002-00 Rev 2.3
Figure 2.16 TB50 Mounted on DIN Rail (Front)
DIN Rail Removal
Place a flat blade screw driver through the slot in the board and
hook the blade into the snap latch. Pry the snap latch away
from the DIN rail lip and repeat for the other side. See Figure
2.17.
Figure 2.17 TB50 Mounted on DIN Rail (Side)
Hook side
Removal
catch for
screwdriver
DIN Rail
snap latch
Hook side