Instruction Manual

PPC-2000 User’s Guide Chapter 2: Hardware Installation

Doc.# 30002-00 Rev 2.3 Watlow Anafaze 67

Connecting Analog Outputs to the PPC-205x

Connect wires directly to the terminals on the bottom of the

PPC-205x modules. The PPC-2050 can source up to eight

analog signals and the PPC-2051 up to four.

Table 2.22 lists the terminal connections for the PPC-2050

module.

Figure 2.54 PPC-205x Connections (Bottom View)

Table 2.22 Analog Output Connections on

Analog Out Module

The AnaWin3 name is shown for the Encoder In Analog Out module with address

11 on the first PPC-2000 in the system. Refer to Outputs on page 135 for a full

explanation of Analog output naming.

Module I/O

Number

Analog Out Module

Connections

AnaWin3 Name

(Input

Spreadsheet)

Voltage Current

+ - Source Sink

Analog Out 1 1A 1B 1B 1A PPC1:AO 31.1

Analog Out 2 2A 2B 2B 2A PPC1:AO 31.2

Analog Out 3 3A 3B 3B 3A PPC1:AO 31.3

Analog Out 4 4A 4B 4B 4A PPC1:AO 31.4

Analog Out 5 5A 5B 5B 5A PPC1:AO 31.5

Analog Out 6 6A 6B 6B 6A PPC1:AO 31.6

Analog Out 7 7A 7B 7B 7A PPC1:AO 31.7

Analog Out 8 8A 8B 8B 8A PPC1:AO 31.8

PPC-2050 PPC-2051

16-pin Terminal Block

for Analog Outputs