TM TM AM-95-NE VM-95-NE Li-ion Battery with LED and 3-Stud or V Mount Thank you for choosing Watson Pro Please read this user manual carefully and keep it for reference before using the battery.
SAFETY INSTRUCTIONS Make sure the battery is fully charged before use. When not in use, remove the battery from its device. Some electronic equipment will draw current even when the switch is off. Do not short-circuit the terminals. This battery is protected with an internal self-resetting fuse, but short circuits may still cause severe damage to the battery. Do not attempt to open the battery case under any circumstances. Do not remove the battery from any equipment that is powered on.
4 OVERVIEW 1. 1 Battery-level LED meter Shows the remaining capacity of the battery. When the capacity reaches less than 9%, the bottom LED will flash. P-tap port 12 V, 10 A max. 4 USB output Press the battery-level check button to start charging or to power your USB device. 5 1. 20 % 3 1. 40 Battery-level check button 100 80 60 2 1. 1 CHECK 2 Mounting interface 5 Battery-level LED indicators for real-time remaining battery capacity.
SPECIFICATIONS Battery 97wh Voltage/ capacity 14.8 V / 6.6 Ah Max. output power 79 W Max. output current 6.5 A Average runtime 154 min. @ 35 W Weight 1.68 lb. (760 g) Dimensions (H × W × D) V Mount: 1.7″ × 4″ × 6.1″ (4.3 × 10.2 × 15.5 cm) 3-Stud: 2″ × 4″ × 6.75″ (5.1 × 10.2 × 17.1 cm) TM TM TM www.poweredbywatson.com Watson Pro is a registered trademark of the Gradus Group. © 2016 Gradus Group LLC. All Rights Reserved.