TM C-SPT Li-ion Battery Charger with P-tap Thank you for choosing Watson Pro Please read this user manual carefully and keep it for reference before using the charger.
SAFETY INSTRUCTIONS Do not store, place, or use the charger where it may come into contact with excess heat, water, or moisture. High-voltage internal components present the risk of electrical shock. Charge only on a vibration-free, dry surface at room temperature. Should you ever notice smoke or a strange odor coming out of the charger, immediately unplug the AC adapter from the power outlet. Using the charger under these conditions can cause a fire or electric shock.
LED STATUS Green Charger is turned on without any batteries connected. Battery is fully charged. Red Battery connected with low or empty power. Flashing red and green The charger has detected some problems with the battery. For more information, or to arrange service, visit www.poweredbywatson.com or call Watson Customer Service at 212-594-2120. Battery (Ah) Approx. charging time (hr.) 4.0 3.6 4.4 4 6.2 5.2 6.6 5.5 8.2 6.6 8.8 7 10.2 8 11.0 9 13.
SPECIFICATIONS Input AC 100 to 240 V AC, 50 to 60 Hz Output voltage DC 16.8 V Output current DC 2.0 A Output connection P-tap Operating temperature 14°F to 95°F (-10°C to 35°C) Dimensions (H × W × D) 1.92 x 2.97 x 5.77 in. (48.8 x 75.5 x 146.5 mm) Weight .99 lb. (450 g) www.poweredbywatson.com Watson Pro is a registered trademark of the Gradus Group. © 2017 Gradus Group LLC. All Rights Reserved.
