Duo Charger for Digital Camera and Camcorder Batteries Owner's Manual Please read before using this equipment.
Thank you for purchasing the Watson Duo Charger. Browse through this manual for instructions and useful tips on how to use your new equipment.
THE WATSON DUO BATTERY CHARGER'S FEATURES INCLUDE: LCD Screen Visually displays the charging status and charging source for each battery individually. Charges two batteries independently Charges two different types of batteries with different voltages simultaneously. Plate switching Charger plate is interchangeable, allowing the Duo Charger to charge a wide variety of batteries. (Charging plates available for purchase separately.
Charges batteries and USB devices Charge a USB device while simultaneously charging your digital camera or camcorder batteries. AC Adapter and DC Cord Attach an external AC adapter for indoor use or a cigarette lighter plug from 12V car DC while you are traveling. Overcharge protection Automatically detects when the battery is fully charged and stops charging to prevent damage to your batteries. Overheat protection The Duo Charger senses when the battery is about to overheat and immediately stops charging.
This intelligent charger for digital camera and camcorder batteries was designed with advanced switching power source technology, allowing you to charge your batteries at home or on the road. The charger is compatible with the brand(s) and model(s) of Li-ion rechargeable batteries listed on the packaging for this manual. Please read these operating instructions carefully before operating this equipment. CHARGING OPERATION: LITHIUM-ION BATTERIES 1 Mount your rechargeable battery.
USB You can use your Duo Charger to charge USB devices while you're also charging your digital camera or camcorder batteries. 1 Plug the USB end of the devices's charging cable into the USB output jack on the side of the Duo Charger. The USB output is displayed on the LCD screen. TEST BUTTON You can test the charge state of your battery even with the Duo Charger unplugged. 1 Just slide the battery into the charging plate and press the TEST button.
LCD INFORMATION: The top screen above will display when you first plug in the Duo Charger. Once charging begins, the screen will be similar to the middle display shown above. You can charge two batteries independently. When charge is complete, "FULL" will appear above the battery icon and the screen will display similar to the bottom illustration.
Test Button LCD USB Output AC Power Charging Plate DC Power Overview | 9
IMPORTANT SAFETY INSTRUCTIONS: CAUTION! TO REDUCE THE RISK OF DAMAGE, SAVE THESE INSTRUCTIONS Do not store, place, or use the charger where it may come into contact with excess heat, water or moisture. High-voltage internal components present the risk of electric shock when exposed. Charge only on a vibration-free, dry surface at room temperature. Should you ever notice smoke or a strange odor coming out of the charger, immediately unplug the AC adapter from the power outlet.
The charger, adapters, and batteries may feel warm during the charging process. This is normal. Unplug the AC adapter from the power outlet and clean the area around the prongs of the plug when necessary. The presence of dust around the prongs can cause fire. AC ADAPTER PRECAUTIONS Never use an electrical outlet whose voltage is outside the rating marked on the AC adapter. Doing so can cause fire or electric shock. Use only the supplied AC adapter or DC car cord for the charger.
Never touch the AC adapter while your hands are wet. Doing so can cause electric shock. Do not overload extension cords or wall outlets. Doing so can cause fire and electric shock. Indoor use only. Do not expose the charger to rain or snow. To reduce the risk of damage to the electrical plug and cord, disconnect by pulling the plug, not the cord. Make sure the cord is located properly so that it will not be stepped on, tripped over, or subjected to damage.
TO MAXIMIZE BATTERY PERFORMANCE Make sure the battery is fully charged before use. Clean the battery and terminals with a clean, soft, dry cloth. The battery may be warm during use or recharging. This is normal. When storing the battery for an extended period, be sure that it is not completely charged, nor completely discharged. The ideal level is a 40% charge. This is approximate; the closer the battery is to this level, the better it will hold its charge during storage.
SPECIFICATIONS: Input Voltage AC 100-240V, 50/60 HZ DC 12/24 2A Output DC 1.2-8.4 V 2A (maximum) USB DC 5V2A (maximum) Charging Time 2-6 Hours Operating Temp. 32°F to 104°F (0°C to 40°C) Storage Temp. -4°F to 140°F (-20°C to 60°C) Dimensions 4.9" x 4.5" x 1.75" (124 x 114 x 44.5 mm) Weight w/o plates 9.7 oz. (275g) with plates 10.76 oz.
ONE-YEAR LIMITED WARRANTY This Watson product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
® www.poweredbywatson.