TM TM AM-95-NC VM-95-NC Li-ion Battery with LCD and 3-Stud or V Mount Thank you for choosing Watson Pro Please read this user manual carefully and keep it for reference before using the battery.
SAFETY INSTRUCTIONS Make sure the battery is fully charged before use. When not in use, remove the battery from its device. Some electronic equipment will draw current even when the switch is off. Do not short-circuit the terminals. This battery is protected with an internal self-resetting fuse, but short circuits may still cause severe damage to the battery. Do not attempt to open the battery case under any circumstances. Do not remove the battery from any equipment that is powered on.
4 OVERVIEW 1 1. Battery-level check button 3 1. P-tap port 12 V, 10 A max. 4 USB output Press the battery level check button to start charging or to power your USB device. 5 1. Mounting interface 88% 2 1. 1 Retime:00000 M LCD Battery capacity meter Remaining charging or usage time (minutes) Charging indicator Battery capacity percentage 2 5 LCD screen shows real-time, to-the-minute, remaining battery capacity and usage.
SPECIFICATIONS Battery 97wh Voltage/ capacity 14.8 V / 6.6 Ah Max. output power 79 W Max. output current 6.5 A Average runtime 154 min. @ 35 W Weight 1.7 lb. (760 g) Dimensions (H × W × D) 1.6″ × 4″ × 6.8″ (4 × 10.2 × 17.3 cm) TM TM TM www.poweredbywatson.com Watson Pro is a registered trademark of the Gradus Group. © 2016 Gradus Group LLC. All Rights Reserved.
