™ P O W E R W B -1 50 -I P -1 B -2 WB-150-IP-1B-2 C O N T R O LL E D 1 QUICK START GUIDE
ANATOMY WB-150-IP-1B-2 CONTROLLED 1 A B POWER C A D E F G NETWORK RESET H I J K
A. Outlet LEDs: These illuminate when power to the matching outlet is on. B. Power Connection LED: This glows with an amber light when the unit is powered. C. AC Power Switch: Press to manually toggle the outlets on or off. D. Mounting Eyelets. E. Network Connection: Connect to the Local Area Network (LAN) for IP control and monitoring. F. Power Inlet: Detachable power cord outlet for 3 prong IEC power cord. G. External Fuse*: May need replacement after an overload. H. Mounting Bracket Grooves I.
PACKAGE CONTENTS This package contains: • The WattBox 150 Series Power Strip • Removeable IEC power cord • 2 wall anchors with M3×16mm screws MOUNTING INSTRUCTIONS This unit can be mounted on any flat surface, either vertically or horizontally. Use the screws and anchors provided to install the unit on a wall as pictured to the right. Use double-sided tape or hook and loop closures (not provided) to attach the unit to a flat surface.
CONNECTIONS AND SETUP The WB-150 has many powerful features that are accessed through OvrC, our award-winning remote management tool. If you desire OvrC connectivity, plug a network cable from your switch into the network port of your WB-150. Plug in the power cord. OvrC Web Server Internet Web Browser Access Mobile Apps Use OvrC Web and smartphone apps to monitor the WattBox remotely Router WB-150-IP-1B-2 NETWORK RESET Finishing Setup with OvrC 1. Ensure the WB-150 is connected to the internet. 2.
LED INDICATORS Link/Activity LED Solid Green: Link Established Blinking Green: Send/Receive Activity Internet LED Solid Green: All host pings successful Blinking Green: At least one host ping successful Off: All host pings timed out Power Solid Orange: A/C power connected Off: No A/C power Outlet LEDs Solid Green: Outlets ON Off: Outlets OFF Note: Both outlets are controlled together on one bank.
Symptom Possible Cause Remedy WattBox is not receiving power (the Power Connection LED is not illuminated 1 minute after connecting AC power). WattBox is not turned on. If the power button does not glow amber, press it. No power is being Ensure the AC power plug is plugged into supplied. a properly grounded 120V wall outlet. Some outlets are controlled by a wall switch. Flip the switches in the room, especially those near the wall outlet. Also check the location’s circuit breakers.
IMPORTANT SAFETY INSTRUCTIONS Read and observe the following safety points at all times. NOTICE For indoor use only. Internal components are not sealed from the environment. The device can only be used in a fixed location. When you install the device, ensure that the protective earthing connection of the socket-outlet is verified by a skilled person. Suitable for installation in Information Technology Rooms in accordance with Article 645 of the National Electrical Code and NFPA 75.
WARNING – Power Cord Safety Do not place the power cord near areas with heavy foot traffic (e.g., hallways). Do not create a trip hazard with the power cord. If the power cord’s protective jacket rips or frays, exposing the internal wiring or shielding, disconnect it from the power source and replace the power cord immediately. See the warranty section of the owner’s manual for details.
• • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the re-ceiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
between the radiator and people and animals. Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et des personnes ou des animaux. WARRANTY 5-Year Limited Warranty This SnapAV® product has a 5-Year Limited Product Warranty.
Retain this label for your records Version 190130-1402
