Manualshelf

PEX-AL-PEX Brochure

ManualsBrandsWatts Radiant ManualsHeatingRadiantPEX-AL - 1/2" - Compression Adapter - 1/2" Female Sweat - 10/Pack
12
SS-T20 Compression and Press fittings:
These ttings are designed for use with Stainless Steel or
T20 copper manifolds.
These specialty ttings integrate the features of either a
Press or Compression tting with the ease of a T20.
SS-T20 Connections are made directly to any Stainless
Steel or T20 Copper Manifold.
Compression Fittings:
All-brass body tting seals without special tools
with double o-ring seals and and a polymer
insulator against the pipe end. Compression
ttings available for 3/8"-1".
RadiantPEX-AL Fitting Systems
Watts Radiant oers three jobsite-proven connection systems that are made to
the ASTM F-1281-05 standard for pipe and ttings.
Press Fittings:
This proven permanent connection features a
brass body with double o-ring seals, stainless
steel sleeves (included with all press ttings), and
a polymer insulator against the pipe end. Press
ttings available for 1/2"-1" (no 3/8" press ttings).
RadiantPEX-AL Tools
15” PressTool with interchangeable
jaws in 1/2”,5/8”, and 3/4” sizes.
19” PressTool with interchangeable
jaws in 1/2”,5/8”, 3/4”, and 1” sizes.
Watts Radiant copper manifolds with
built-in Press fittings
Watts Radiant copper manifolds with
built-in compression fittings.
Use RadiantPEX-AL SS-T20 Press and
Compression fittings with Watts Radiant’s
Stainless Steel manifolds.
RadiantPEX-AL manifolds
RadiantPEX-AL reamers and
pipe bending tool
For
Radiant Heating,
Snow Melting and
Hydronic Piping
Cross-Linked Polyethylene x Aluminum x Cross-Linked Polyethylene
RadiantPEX-AL Specifications
Note: Operating Temperature / Pressure for all sizes is 1800F at 125psi.
!! !
MIN. BEND STANDARD FLUID CAPACITY
COILS I.D. O.D. RADIUS COIL LENGTHS PER 1000’
"#$%!&'()'*+,-./01! 23"45!)*! 23467!)*! 738!)*! 7229! 83"!:';3
<#7%!&'()'*+,-./01! 23822!)*! 235"2!)*! "37!)*! "229#8229#<2229! =3<!:';3
8#$%!&'()'*+,-./01! 235"6!)*! 236$6!)*! 432!)*! "229#<7229! <537!:';3
"#4%!&'()'*+,-./01! 23$25!)*! 23=$4!)*! 838!)*! <229#"229#8229! 783"!:';3
<%!&'()'*+,-./01! <32"7!)*! <3752!)*! 538!)*! <229#"229! "=38!:';3
“Stays right
where you
place it.”
Watts Radiant is an ISO9001:2008 approved facility.
In the United States:
Watts Radiant
4500 Progress Place
Springfield, MO 65803
1-800-276-2419 toll-free
417-864-6108 phone
417-864-8161 fax
www.wattsradiant.com
In Canada:
Watts Industries–Canada
5435 North Service Road
Burlington, ON L7L 5H7
1-888-208-8927 toll-free
905-332-4090 phone
905-332-7068 fax
www.wattscanada.ca
© 2012 Watts Radiant
F-WR-PEX-AL-1207

Summary of content (2 pages)