USER GUIDE MILUX Chrono-thermostat
GB OVERVIEW The MILUX Chrono-thermostat is a programmable digital thermostat able to control and regulate directly your central heating (Electric, Gas, Oil) or cooling system. It’s weekly programmable function enables power savings according to your every day life.
GB TECHNICAL CHARACTERISTICS Measured temperature precision Set temperature precision Set temperature range Regulation characteristics Driving element Connection Batteries 0.1°C (or 0.1°F) 0.5°C (or 0.5°F) 5°C - 35°C for comfort and reduced, 0,5°C - 10°C for anti-freeze - regulation speed: 7.5 cycle per hour (8 minutes cycle) - regulation band: 2°K of proportional band (adjusted power) 5A RELAY (with heater and cooling devices contacts) 3 points screw connector on the rear part of the box 3x LR6 AA 1.
GB INSTALLATION & WIRING 1 Place the MILUX thermostat on a plain wall away from windows and doors and not to close to the heater. Put the connection wires thru the back hole of the rear part Use the screws to mount the rear part on the wall. 2 Connect the wires to the connector. Follow the connection diagram 3 Remove the plastic isolator on the batteries to power up the MILUX.
INSTRUCTIONS Holiday function activated GB How to use your MILUX thermostat use ? ? keys to change mode Operating mode MENU Temperature overridden Weak Batteries Central heating working Week days Temperature Time display use + / - keys to change temperature Graphic program display Room temperature displayed QUICK START Short and intuitive instructions With ? ? keys Slide the frame inside the top MENU to change operating mode (see Modes description) With + / - keys change set temperature or adjust
MODES DESCRIPTION Instruction details for each mode GB Manual COMFORT operating mode : Force comfort temperature operation indefinitely or for a few hours or days (see Holiday function). By pressing + or - key the comfort temperature start to blink and can be adjusted. If you wait a few seconds the actual room temperature reappears. MILUX regulation will now follow comfort temp. AUTOMATIC operating mode : MILUX Chrono-thermostat will follow automatically the program according to the actual time.
Set CLOCK menu : Use this menu to adjust the MILUX clock to the actual time.
SPECIAL FUNCTIONS HOLIDAY Function : With ? ? keys go to days Holiday / Key Lock / Hot-Cold / Reset only for comfort mode, reduced mode or anti-freeze mode. function. Then you can select with + or - keys the number of hours before the MILUX automatically returns to GB or the number of mode and continues to follow the program.
BATTERIES REPLACEMENT 1 How to change the batteries 2 GB 3 3 To close the MILUX, Press on then left side button and pull the front panel to remove it. You now have access to the batteries. Replace the three LR6 AA 1.5V batteries with new ones (Alkaline cells recommended) IMPORTANT: You have 1 minute to change the batteries Place the front panel in front of the rear part. Insert the three contacts in the connector holes. Then push the front panel while keeping it parallel to the rear part.
