Submittal Sheet

Series LFBD-QT
Quarter-Turn Boiler Drains
Sizes:
1
⁄2"-
3
⁄4" (15-20mm)
Series LFBD-QT quarter-turn boiler drains offer an innovative
alternative to old-fashion multi-turn type boiler drains. These
drains were developed to provide the speed and convenience
of quarter-turn ball valve performance for boiler drain or sill
cock applications.
For durability and extended length service, Series LFBD-QT
uses a rugged forged brass body, adjustable Teflon
®
stem
packing and rugged aluminum tee handles. For added utility,
the
1
⁄2" (15mm) model features a dual-pattern combination
threaded and solder end by
3
⁄4" (20mm) hose connection. The
3
⁄4" (20mm) model is available in either solder or threaded ends.
The LFBD-QT features Lead Free* construction to comply with
Lead Free* installation requirements.
Features
•Quarter-turnballvalvedesign
•Positiveshutoff
•Ruggedaluminumtee-handledesign
•AdjustableTeflon
®
stem packing
Specifications
Aquarter-turnboilerdrainshallbeinstalledwhereindicatedon
the plans. Lead Free* Quarter-Turn Boiler Drains shall be con-
structed using Lead Free* materials. Lead Free drains shall
comply with state codes and standards, where applicable,
requiring reduced lead content. The boiler drain shall be manu-
factured from forged Lead Free* brass and have an adjustable
Teflon
®
stem packing. The boiler drain shall feature a quarter-
turn ball valve design and positive shutoff. The boiler drain shall
be a Watts Series LFBD-QT.
Materials
Body: Lead Free* brass
StemPacking:Teflon
®
TeeHandle:Aluminum
Pressure-Temperature
Maximum Temperature: 250°F (121°C)
MaximumPressure:200psi(13.8bar)
For Boiler Drain or Sill Cock Applications
ES-LFBD-QT
Job Name
––––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
––––––––––––––––––––––––––––––––––––––––––
 Approval
––––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
 Contractor’sP.O.No.
–––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
 Representative
–––––––––––––––––––––––––––––––––––––––––
3
⁄4" LFBD-QT
C
B
A
Dimensions – Weights
Model Size A B C Weight
in. mm in. mm in. mm in. mm lbs. kg
LFBD-QT
1
⁄ 2 15 3
3
⁄ 8 86 2
1
⁄ 4 57
15
⁄ 16 24 .04 .01
LFBD-QT
3
⁄ 4 20 4
1
⁄ 8 104 2
7
⁄ 16 62 1
1
⁄ 8 28 .05 .02
Teflon
®
is a registered trademark of E.I. Dupont de Nemours & Company Incorporated.
ES-LFBD-QT 1323 © 2013 Watts
USA:Tel:(978)688-1811•Fax:(978)794-1848•www.watts.com
Canada: Tel:(905)332-4090•Fax:(905)332-7068•www.watts.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts
reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications
on Watts products previously or subsequently sold.
A Watts Water Technologies Company
LEAD FREE
*
*The wetted surface of this product contacted by consumable
water contains less than 0.25% of lead by weight.