Instructions / Assembly

ManualsBrandsWatts ManualsKitchen10 in. Pleated Sediment 5 Micron Filter for Big Blue System

Whole House Filtration with Pressure Relieve Valve

Watts Premier • 1725 W. Williams Drive #C20 • Phoenix, AZ 85027

1-800-752-5582 • www.wattspremier.com

Model: 500228

INSTALLATION, OPERATION AND MAINTENANCE MANUAL

Please read carefully before proceeding with installation. Your failure to follow any attached instructions

or operating parameters may lead to the product’s failure.

Save manual for future reference

Warning

Rev. Date 01/27/2010 Manual # 299111

Summary of content (6 pages)

PAGE 1
INSTALLATION, OPERATION AND MAINTENANCE MANUAL Warning Please read carefully before proceeding with installation. Your failure to follow any attached instructions or operating parameters may lead to the product’s failure. Save manual for future reference Whole House Filtration with Pressure Relieve Valve Model: 500228 Watts Premier • 1725 W. Williams Drive #C20 • Phoenix, AZ 85027 1-800-752-5582 • www.wattspremier.com Rev.
PAGE 2
Watts Premier’s Whole House Filtration with pressure relieve valve Watts Premier’s Whole House Filtration system should be installed on the main cold water line servicing the house and installed in location that is protected of the environment. Watts Premier does not take any responsibility for the plumbing of the system into the water line. Install accordingly to your local plumbing codes. Watts Premier’s Whole House Filtration system comes with one inch quick connect fittings.
PAGE 3
1: Water Line 1.1 1.2 1.3 Check to see what is the size of water line that you will be tapping into. Verify what material your water pipe is made of; Copper, PVC schedule 40/80, Black Iron or Galvanized pipe. Watts Quick Connect fittings accept all water pipe materials. If needed, purchase the required fittings and/or materials from your local hardware or plumbing center to make the connections to the Whole House system. PVC reducing bushings are recommended if the porting requires reducing.
PAGE 4
: Connecting to Water Line 4.1 4.2 Shut off main water supply and open a faucet down stream to allow draining of water out of water pipes. Cut the water line where the Whole House Filter System is to be installed. Make sure the location allows for future servicing of the system. Note: This system will weight approximately 18 pounds when in service. 4.3 4.4 4.5 Mount the system to the wall using the mounting bracket.
PAGE 5
Trouble Shooting Problem Possible Cause Solution 1. Filter bowl has no water in it. Water is not turned on. Turn water on. Ball Valve Turned “OFF” 2. Leaking at the bowl. O-ring kinked or not seated. Make sure valve handle is inline with the piping “ON”. Check / Replace / Re-seat O-ring. Bowl not tightened enough. Tighten bowl. 3. Leaking at the valve fittings. Improper installation Replace or repair fittings. 4.
PAGE 6
1725 W. Williams Dr. C-20 • Phoenix, Arizona 85027 Limited Warranty What your Warranty Covers: If any part of your WATTS PREMIER unit is defective in workmanship (excluding replaceable filters ), return unit after obtaining a return authorization (see below), within 1 year of original retail purchase, WATTS PREMIER will repair or, at WATTS PREMIER’S option, replace the system at no charge. How to obtain Warranty Service: For warranty service, call 1-800-752-5582 for a return authorization number.