Instructions / Assembly

Trouble Shooting
Problem Possible Cause Solution
1. Filter bowl has no water in it. Water is not turned on. Turn water on.
Ball Valve Turned “OFF” Make sure valve handle is
inline with the piping “ON”.
2. Leaking at the bowl. O-ring kinked or not seated. Check / Replace / Re-seat O-ring.
Bowl not tightened enough. Tighten bowl.
3. Leaking at the valve ttings. Improper installation Replace or repair ttings.
4. Leaking at top of valve (lid). Faulty lid. Call Watts Premier at 1-800-752-
5582 for replacement.
5. Low water ow / pressure. Filter clogged. Replace lter.