Manual

Series 35
Quick-Connect Ends
Watts Quick-Connect Ends are designed and manufactured
for many years of trouble free service. Produced of off white
Polysulfone, a high performance thermal plastic material, the
Watts Quick-Connect design allows for quick and easy con-
nections without the use of installation tools.
Specifications
Connection shall be made using Watts Series 35
Quick-Connect fitting with Integral Collet and O-Ring guide.
Fitting shall be able to fully rotate under pressure and allow for
easy disconnect and reuse without the use of disconnection
tools. Fitting must not disassemble to disconnect
Approvals
NSF-61, NSF-14, CSA B137.5, ASTM F877, UPC, ASSE 1061
Ratings
100psi @ 180°F (6.8 bar @ 82°C)
250psi @ 75°F (17.3 bar @ 24°C)
Dimensions – Weights approx. (tolerance +/- 1/8)
For Residential and Commercial Applications
ES-QC-35Ends
Job Name
–––––––––––––––––––––––––––––––––––––––––––
Contractor
––––––––––––––––––––––––––––––––––––––––––––
Job Location
–––––––––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Engineer
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
––––––––––––––––––––––––––––––––––
Approval
–––––––––––––––––––––––––––––––––––––––––––––
Representative
––––––––––––––––––––––––––––––––––––––––
3545
3546
A
B
A
B
Type 45 End Stops
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
Package Type: Bulk
3545-08
3
⁄8" CTS 1
1
⁄4 32 1 25 0.3 .14
3545-10
1
⁄2" CTS 1
7
⁄16 37 1
1
⁄8 29 0.5 .23
3545-14
3
⁄4" CTS 1
1
⁄2 38 1
7
⁄16 37 0.8 .36
3545-18 1" CTS 1
1
⁄2 38 1
3
⁄4 44 1.2 .54
Package Type: Poly Bag
3545B-08
3
⁄8" CTS 1
1
⁄4 32 1 25 0.3 .14
3545B-10
1
⁄2" CTS 1
7
⁄16 37 1
1
⁄8 29 0.5 .23
3545B-14
3
⁄4" CTS 1
1
⁄2 38 1
7
⁄16 37 0.8 .36
3545B-18 1" CTS 1
1
⁄2 38 1
3
⁄4 44 1.2 .54
Type 46 End Plugs
MODEL SizE & CONNECTiON iTEM LENGTH iTEM HEiGHT iTEM WEiGHT
A B
in. mm in. mm lbs. kg.
Package Type: Bulk
3546-18 1" CTS 1
11
⁄16 43 1
3
⁄8 35 0.5 .23
Package Type: Poly Bag
3546B-18 1" CTS 1
11
⁄16 43 1
3
⁄8 35 0.5 .23
Caution: The polysulfone material used in the Quick-Connect fittings
can be compromised by exposure to volatile organic compounds
(VOC’s) and caustic chemicals. Therefore, DO NOT expose this prod-
uct to any such chemical or foreign substance, which would include
exposure to the following products: Pipe Dopes (thread sealants),
bug sprays, lubricants, cleaners, paints, bleaches, acids, solder fluxes,
plastic piping primers and cements, oxidizing agents, alkaline solutions,
thinners, fuels, oil based caulks, hydrocarbons, spray foam of foaming
agents (insulation).
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com
Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference
only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or
modify product design, construction, specifications, or materials without prior notice and without incurring any
obligation to make such changes and modifications on Watts products previously or subsequently sold.
A Watts Water Technologies Company
LEAD FREE
*
* The wetted surface of this product contacted by consumable
water contains less than one quarter of one percent (0.25%) of
lead by weight.
ES-QC-35Ends 0933 © 2009 Watts