Spec Sheet

ManualsBrandsWatts ManualsReplacement FiltersPWPL10M20 - 20 Micron Standard Filter Cartridge - 9-3/4"

For Residential and Light Commercial Applications

ES-WQ-PWPL

Job Name

–––––––––––––––––––––––––––––––––––––––––––

Contractor

––––––––––––––––––––––––––––––––––––––––––––

Job Location

–––––––––––––––––––––––––––––––––––––––––

Approval

–––––––––––––––––––––––––––––––––––––––––––––

Engineer

–––––––––––––––––––––––––––––––––––––––––––––

Contractor’s P.O. No.

––––––––––––––––––––––––––––––––––

Approval

–––––––––––––––––––––––––––––––––––––––––––––

Representative

––––––––––––––––––––––––––––––––––––––––

Pleated Filter Cartridges

Greater surface area for longer life and

reduced filtration costs.

Watts Pleated filter cartridges outperform wound, spun, melt

blown, resin bonded, and other ”depth” type filter elements

because of our high surface area.

Lower pressure drop is another significant advantage. Using

pleated cartridges allows for increased flow rates and the use

of smaller filter housings to reduce capital equipment costs.

Further savings are provided because our 100% synthetic

filter media is cleanable, 5 micron and up, to lower cartridge

replacement costs. Pleated filter cartridges outperform other

pleated elements because our high-performance filter media is

systematically produced using 100% synthetic fibers, with no

binders or additives to leave a residue, foam or contaminate.

Our filter media is dramatically thicker than other products.

For this reason, Pleated cartridges provide “depth” filtration for

greater sediment removal, along with more surface area.

Features

• Filter media is pleated for greater surface area

• Synthetic filter media is cellulose-free

• “Thicker” filter media has a greater capacity to capture and

retain particles, compared to thin, more rigid media types,

which have less void space for particle retention

• 0.35 media use a multi-ply laminate for superior performance

• Long lengths have netting to hold pleats in place

• All cartridge types and lengths are wrapped

• Full product line (Large selection of types, lengths &

micron ratings)

• Low pressure drop, long life, and reduced filtration costs,

compared to wound and spun cartridges

• No additives or binders, which may cause foaming

• Increased dirt holding capacity, longer life, fewer

cartridge replacements needed, and reduced filtration costs,

compared to other pleated cartridge suppliers

• Increased particle removal efficiency

• Superior performance and appearance

PURE WATER

A multi-ply laminate is used with our sub micron grade for

longer life and greater solids removal.

Series PWPL

Do not use with water that is microbiologically unsafe or of

unknown quality without adequate disinfection before or after

the system.

WARNING

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements,

please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-

out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

Summary of content (5 pages)

PAGE 1
ES-WQ-PWPL For Residential and Light Commercial Applications Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––– Job Location –––––––––––––––––––––––––––––––––––––––––– Approval –––––––––––––––––––––––––––––––––––––––––––––– Engineer –––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No.
PAGE 2
Lower pressure drop for higher flow rates These cartridges are pleated, so initial pressure drop is significantly less compared to depth cartridges, such as wound, spun, melt blown and resin bonded. As a result, higher flow rates are possible, reducing filter housing size requirements to lower capital equipment costs.
PAGE 3
Pleated Filter Cartridges Greater surface area for longer life and reduced filtration costs. Standard 23⁄4" OD x 93⁄4" Length MODEL NO. MEDIA TYPE MICRON RATING NUMBER PER CASE Synthetic Synthetic Synthetic Synthetic Synthetic Synthetic 0.35 1 5 20 50 100 12 12 12 12 12 12 MEDIA TYPE MICRON RATING NUMBER PER CASE Synthetic Synthetic Synthetic 1 5 20 24 24 24 MEDIA TYPE MICRON RATING NUMBER PER CASE Synthetic Synthetic Synthetic Synthetic Synthetic 0.
PAGE 4
Pleated Filter Cartridges Greater surface area for longer life and reduced filtration costs. Full Flow (FF) 41⁄2" OD x 93⁄4" Length MODEL NO. LENGTH MEDIA TYPE PWPL10FFM.35 93⁄4" Synthetic Synthetic PWPL10FFM1 93⁄4" Synthetic PWPL10FFM5 93⁄4" Synthetic PWPL10FFM20 93⁄4" Synthetic PWPL10FFM50 93⁄4" Note: Cartridges listed above fit in Full-Flow and Big-Blue® filter housings. MICRON RATING NUMBER PER CASE 0.35 1 5 20 50 4 4 4 4 4 MICRON RATING NUMBER PER CASE 0.
PAGE 5
Jumbo Filter Cartridges For S.S. (stainless steel) series Jumbo Filter Cartridge Housings with cellulose-free synthetic and mesh media in a wide range of micron ratings. PWPL40 PWPL40 FILTER HOUSING MODEL NO. MICRON RATING 40 0.35 1 5 20 50 100 FILTER HOUSING MODEL NO. MICRON RATING 90 0.35 1 5 20 50 100 MODEL NO. WITH SYNTHETIC MEDIA PWPL40M.35 PWPL40M1 PWPL40M5 PWPL40M20 PWPL40M50 PWPL40M100 NUMBER PER CASE 1 1 1 1 1 1 PWPL90 MODEL NO. WITH SYNTHETIC MEDIA PWPL90M.